|
The influence factors of control characteristics of accumulator fast forging circuit of pump-controlled hydraulic press were researched by using the method of power bond graph, the simulation research was done through Matlab/Simulink and the experiment was carried out on pump-controlled hydraulic press of 0.6 MN.The models of cylinder, pipe, accumulator, proportion variable radial piston pumps and movable crossbeam were established, while the power bond graph model of circuit and the Matlab/Simulink simulation model were deduced. In addition, the experimental system of pump-controlled hydraulic press of 0.6 MN was designed and established. The effects of forging frequency, forging stroke and initial pressure on the control characteristics of accumulator fast forging circuit of pump-controlled hydraulic press were investigated through simulation and experiment. The results indicate that the decreased forging stroke can result in an increased forging frequency and an improved forging precision within certain limits; meanwhile, the initial pressure of accumulator is higher, the response of circle is faster.
|
|
［1］刘社英,张宏. 浅谈我国锻造液压机的发展过程和发展趋势[J].液压气动与密封,2010,30(9):1-4.Liu Sheying,Zhang Hong.Discussion on the development process of forging hydraulic press and trends[J]. Hydraulics Pneumatics & Seals,2010,30(9):1-4.
［2］陈柏金,黄树槐,靳龙,等.16 MN快锻液压机控制系统研究[J].中国机械工程,2008,19(8):990-993.Chen Bojin,Huang Shuhuai,Jin Long,et al. Development of the control system for 16MN fast forging hydraulic press[J]. China Mechanical Engineering, 2008,19(8):990-993.
［3］姚静,孔祥东.锻造液压机管道动态特性仿真研究[J].机床与液压,2011,39(9):105-107.Yao Jing,Kong Xiangdong.Study on pipe dynamic characteristics of forging hydraulic press[J]. Machine Tool and Hydraulics,2011,39(9):105-107.
［4］陈照弟，李洪人，王广怀，等.蓄能器对管路系统压力冲击影响的分析研究[J]. 液压气动与密封，1999，19（2）：2-5.Chen Zhaodi，Li Hongren，Wang Guanghuai，et al. Study of accumulator influence on hammer in pipe system[J]. Hydraulics Pneumatics & Seals，1999，19（2）：2-5.
［5］权凌霄,孔祥东,高英杰,等.不考虑进口特性的蓄能器吸收冲击理论及试验[J].机械工程学报,2007,43(9):28-32.Quan Lingxiao,Kong Xiangdong,Gao Yingjie,et al. Theory and experiment of accumulator absorbing pressure pulsation without regard to its entrance characteristics[J]. Chinese Journal of Mechanical Engineering,2007,43(9):28-32.
［6］解文科，王丽薇. 活塞式蓄能器在大型锻造油压机上的应用[J].机床与液压,2013,41(5):90-93.Xie Wenke,Wang Liwei. Application of piston accumulator in large forging oil press[J]. Machine Tool and Hydraulics, 2013,4(5):90-93.
［7］杨继东, 王昌垒, 苏振华.31.5 MN快锻液压机蓄能器快锻控制特性分析[J].重庆理工大学学报:自然科学版,2012,26(5):33-36.Yang Jidong,Wang Changlei,Su Zhenhua. Analysis on the control characteristics for 31.5 MN fast forging hydraulic press using accumulator[J]. Journal of Chongqing University of Technology:Natural Science Edition,2012,26(5):33-36.
［8］陈锦耀，宋荣利，郭爱东.基于功率键合图的万向车液压系统建模与仿真[J].中国工程机械学报，2013,11（4）:309-312.Chen Jinyao,Song Rongli,Guo Aidong. Modeling and simulation on universal-truck hydraulic system based on power bond graphs[J]. Chinese Journal of Construction Machinery，2013,11（4）:309-312.
［9］Li Liang, Chen Kuisheng, Fu Shuguang. Study of the hydraulic model system basing on the power bond graph[A]. Chinese Association of Fluid Power Control Engineering. Fluid Dynamic and Mechanical & Electrical Control Engineering[C]. Switzerland：Trans.Tech. Publications，2012.
［10］周恩涛,高磊,赵亮.功率键合图在研究阀控缸液压冲击中的应用[J].机床与液压,2006,34(11):124-125.Zhou Entao, Gao Lei, Zhou Liang. The application of bond graph in researching hydraulic impact of cylinder controlled by valve[J]. Machine Tool and Hydraulics,2006,34(11):124-125.
［11］田树军.液压系统动态特性数字仿真[M].大连:大连理工大学出版社,2012.Tian Shujun. Dynamic Simulation of Hydraulic Syetems[M].Dalian:Dalian University of Technology Press,2012.
|
Copyright Forging & Stamping Technology.All rights reserved