Transactions of Materials and Heat Treatment

Title：Design of multi-position progressive die for parts in stove burner

Authors： Shangguan Xionghui Wang Ting Xia Qinxiang Qiu Zunwen Zhao Xuezhi

Unit： Guangdong Kelon Mould Co. Ltd. South China University of Technology

KeyWords： stove burner layout design progressive die cam driver bending hemming-flattening

ClassificationCode：

year,vol(issue):pagenumber：2014,39(4):93-96

Abstract：

The stove burner needs blanking, drawing, shaping, piercing, flanging, flange bending,pre-bending, flattening and other processes to be produced for its complicated structure. The structure, stamping processes and schemes of stove burner were analyzed, then the fourteen positions progressive stamping processes for manufacturing parts was determined and the layout was designed. The structural features of overall structure, cam driver bending and hemming-flattening structure were studied, and the main parts of progressive die were designed and improved. The production tests prove that the die structure is reasonable, reliable and high efficient, and suitable for mass production of parts in stove burner.

Funds：

广东省中国科学院全面战略合作项目（2012B091100251）

上官雄辉（1966-）男，学士，工程师

Reference：

[1]张冬霞，冯良. 燃烧器发展简史[J]. 工业加热，2007，36(2)：41-43.

Zhang Dongxia，Feng Liang. The development history of burner[J]. Industrial Heating，2007，36(2):41-43.

[2]杨义，孙慧，王梅. 我国城市燃气发展现状与展望[J].油气储运，2011，30(10)：725-728.

Yang Yi，Sun Hui，Wang Mei. Present situation and prospect of city gas development in our country[J]. Oil & Gas Storage and Transportation，2011，30(10):725-728.

[3]沈辉. 燃气炉具燃烧器优化设计[J]. 科技创新导报，2011,(9)：111.

Shen Hui. Optimum design of gas stove burner[J]. Science and Technology Innovation Herald，2011，(9):111.

[4]余康. 一种引射管采用文丘里管延伸结构的燃烧器[A]. 中国土木工程学会燃气分会年会论文集[C].昆明,2012.

Yu Kang. A burner with the ejector using venturi tube structure[A]. Proceedings of China Civil Engineering Society Gas Branch Conference[C].Kunming,2012.

[5]陈炎嗣. 多工位级进模设计与制造[M]. 北京：机械工业出版社，2006.

Chen Yansi. Design and Manufacture of Multi-position Progressive Die[M]. Beijing: China Machine Press，2006.

[6]陈志超，夏琴香，郭新年，等. 某高强钢板汽车结构件多工位级进模设计[J]. 锻压技术，2012，37(2)：47-50.

Chen Zhichao，Xia Qinxiang，Guo Xinnian，et al. Design of multi-position progessive die of structural part made by high-strength steel[J]. Forging & Stamping Technology，2012，37(2):47-50.

[7]伍俊棠，赵亦希，李淑慧，等. 滚压包边角度对包边件轮廓尺寸变动的影响[J]. 锻压技术，2010，35(3)：29-33.

Wu Juntang，Zhao Yixi，Li Shuhui，et al. Effect of hemming angle on dimensional deviation during roller hemming process [J]. Forging & Stamping Technology，2010，35(3):29-33.

[8]杨宽，刘桂萍，杨旭静，等. 汽车覆盖件包边机构运动分析与包边仿真[J]. 汽车工程，2012，34(3)：272-276.

Yang Kuan，Liu Guiping，Yang Xujing，et al. Hemming mechanism kinematic analysis and hemming simulation for vehicle closure panels[J]. Automotive Engineering，2012，34(3): 272-276.

[9]肖祥芷，王孝培. 冲压模具设计[M]. 北京：电子工业出版社，2007.

Xiao Xiangzhi，Wang Xiaopei. Stamping Die Design[M]. Beijing: Publishing House of Electronics Industry，2007.

[10]夏琴香，袁宁. 模具设计及计算机应用[M]. 广州：华南理工大学出版社，2008.

Xia Qinxiang，Yuan Ning. Die & Mould Design and Computer Applications[M]. Guangzhou: South China University of Technology Press，2008.

Service：

【This site has not yet opened Download Service】【Add Favorite】