Transactions of Materials and Heat Treatment

Title：Forging die design of gear blank based on UG NX

Authors： Jin Caishan

Unit： Qingdao Technical College

KeyWords：ＵＧＮＸ die design gear blank forging

ClassificationCode：TG315.2

year,vol(issue):pagenumber：2014,39(5):100-105

Abstract：

Traditional forging die design is tedious and error prone in aspects such as drawing creating of forgings, basic data analysis, cavity design,etc., and subsequent processing is long. By using UG NX 3D software, forging product design and modeling could be quickly finished, and then to accurately analyze the basic data related to forging die design. Utilizing “mold wizard” tool for typing, which was one of UG NX software modules, mold cavity creation could be quickly and accurately done, so as to provide necessary model for the following manufacturing of dies. The standard library of upper and lower modules of forging die could be established by using tools in “part family” module of UG NX software, which laid the foundation for next steps in other dies design. The efficiency of total die design is improved by 50% or more.

Funds：

金彩善（1965-），男，学士，高级工程师

Reference：

［1］闫洪. 锻造工艺与模具设计[M].北京：机械工业出版社，2012.Yan Hong. Forging Technology and Mold Design [M]. Beijing: China Machine Press，2012.
［2］李志尊. UG NX7.5基础应用与范例解析[M].北京：机械工业出版社，2012.Li Zhizun. UG NX7.5 Based Application and Example Analysis[M].Beijing: China Machine Press，2012.
［3］翟羽佳，齐广霞. 基于UGII的叶片精锻模具设计[J]. 锻压技术, 2006,31(1):64-66.Zhai Yujia, Qi Guangxia. UGII-based vane precision forging die design [J].Forging & Stamping Technology, 2006, 31(1):64-66.
［4］李素萍，刘剑，刘根生，等.基于UG参数化快速设计方法的研究及应用[J].锻压技术，2006,31(2):85-88.Li Suping, Liu Jian, Liu Gensheng, et al. Study and application of the parameterized quick design method base on unigraphics [J]. Forging & Stamping Technology, 2006, 31(2):85-88.
［5］姚泽坤.锻造工艺学与模具设计[M].西安:西北工业大学出版社，2007.Yao Zekun. Forging Technology and Mold Design [M]. Xian: Northwestern Polytechnical University Press，2007.
［6］吕炎. 锻造工艺学[M].北京：机械工业出版社，2011.Lv Yan. Forging Technology [M].Beijing: China Machine Press，2011.
［7］刘润广. 锻造工艺学[M].哈尔滨：哈尔滨工业大学出版社，1992.Liu Runguang. Forging Technology [M]. Harbin: Harbin Institute of Technology Press, 1992.
［8］中国机械工程学会塑性工程学会编.锻压手册[M].北京：机械工业出版社，2008.The China Society for Technology of Plasticity of CMES .Forging Manual [M].Beijing: China Machine Press，2008.
［9］叶鹏，胡军，李平. UG的参数化建模方法及三维零件库的创建[J]. 机械,2004,31(S1):74-76.Ye Peng, Hu Jun, Li Ping. The method of parameterization model of UG and the establishment methods of 3D part warehouses [J].Machinery, 2004, 31(S1):74-76.
［10］魏科，王高潮，李宁，等.UG二次开发在辊锻模具设计中的应用[J]. 锻压技术, 2011,36(3):135-139.Wei Ke, Wang Gaochao, Li Ning, et al.Roll forging die design based on UG secondary development[J]. Forging & Stamping Technology, 2011,36(3):135-139.

Service：

【This site has not yet opened Download Service】【Add Favorite】