Transactions of Materials and Heat Treatment

Title：Application of near net shape process on the sliding parts

Authors： Zhou Yan Gao Yuanyuan

Unit： Guizhou Province Machinery and Electronics Product Quality Supervision and Inspection Institute

KeyWords： sliding parts near net shape processing cold extrusion

ClassificationCode：

year,vol(issue):pagenumber：2014,39(7):5-9

Abstract：

Using“near net shape processing” technology of direct extrusion once forming，batch production for cold extrusion of spherical slipper parts of aviation hydraulic pump was realized.By examining the size precision and roughness of the cold extrusion, the technical requirements of IT7 level precision of sphere size and surface roughness Ra0.4 μm were met. The tests of hardness，metallographic structure，and abrasion resistance etc. for spherical slipper parts produced by cold extrusion and turning were conducted.The results show that compared to turning parts，by using cold extrusion，the surface hardness (tensile strength) is improved by about 35%，the wear resistance is improved by above 60%；the material utilization rate reaches 90% which saves materials by above 50%；and the forming time is reduced from 3.5 min for each part when turning to 15 s which improves the machining efficiency significantly.

Funds：

贵州省科技计划课题（黔科合GY字（2006）3001 ）

周艳（1967-），女，学士，高级工程师

Reference：

[1]蒋鹏, 罗守靖,谢谈，等. 国内精密锻造技术的近期状况[J].锻压技术，2002，27（3）：12-15.

Jiang Peng，Luo Shoujing, Xie Tan，et al. Recent status of precise forging technology in China[J]. Forging & Stamping Technology，2002，27（3）：12-15.

[2]吕炎.精密塑性体积成形技术[M].北京：国防工业出版社,2003.

Lv Yan. Precision Plastic Forming Technology
［M］.Beijing： National Defence Industry Press,2003.

[3]洪慎章. 冷挤压零件的工艺设计[J]. 模具技术,2004,（3）:43-45.

Hong Shenzhang.Cold extrusion parts process design[J]. Die Technology,2004,（3）:43-45.

[4]吴诗惇.挤压理论[M].北京：国防工业出版社,1994.

Wu Shidun.Extrusion Theory[M].Beijing：National Defence Industry Press,1994.

[5]杨长顺.冷挤压工艺实践[M].北京：国防工业出版社，1994.

Yang Changshun.Cold Extrusion Process[M].Beijing：National Defence Industry Press，1994.

[6]郑伟刚，束吴，吴启山,等. 球面滑履冷挤压模脱模装置的改进设计研究[J]. 锻压技术,2009,34（3）：100-102.

Zheng Weigang,Shu Wu, Wu Qishan, et al. Improved design and research on demoulding device of forging technology[J]. Forging & Stamping Technology,2009,34（3）：100-102.

[7]黄海波，郑伟刚，腾生磊,等. 柱塞泵滑靴冷挤压成形工艺分析及数值模拟[J].锻压技术，2012,37（1）：73-76.

Huang Haibo,Zheng Weigang,Teng Shenglei,et al. Process analysis and numercial simulation of cold extrusion forming for piston pump slipper [J]. Forging & Stamping Technology,2012,37（1）：73-76.

[8]贾建波，徐岩.汽车半轴管挤压成形缺陷分析与工艺改进[J]. 锻压技术，2011,36（1）：26-29.

Jia Jianbo, XuYan.Research on extrusion defects of auto half shaft bushing and technology improvement[J]. Forging & Stamping Technology,2011,36（1）：26-29.

[9]DIN 50150-1976, Conversion table for vickers hardness，brinell iardness，Rockwell hardness and tensile strength[S].

Service：

【This site has not yet opened Download Service】【Add Favorite】