Transactions of Materials and Heat Treatment

Title：Research status and development tendency of AC servo press

Authors： Zhao Shengdun Chen Chao Cui Minchao Meng Dean Cai Houyong

Unit： Xi′an Jiaotong University

KeyWords： mechanical manufacturing and automation AC servo motor servo press servo control

ClassificationCode：TG315

year,vol(issue):pagenumber：2015,40(2):1-7

Abstract：

AC servo press has the advantages of large productivity, good flexibility, high precision, energy conservation and environmental protection, and it becomes the hot topics in the field of advanced forging equipment. Firstly, the three generations of forging equipment were introduced, and a concise introduction about the structure of AC servo presses was carried on. The characteristics of the AC servo press were expounded, and the advantages of AC servo press which was unparallel over the traditional mechanical press were presented. The research status of AC servo press at home and abroad was discussed by introducing several typical AC servo press products from some famous companies, and the reasons of the slow development in AC servo press were analyzed, which provides some references to experts. Finally, the development trend of AC servo press in the future was analyzed, and it was pointed out that the AC servo press would become the main development direction in the field of forging equipment in the future.

Funds：

国家自然科学基金资助项目（51335009）；国家04重大科技专项（2012ZX04004021）；博士点基金（20100201110002）

赵升吨（1962-），男，博士，教授，博士生导师

Reference：

［1］王守华. 蒸汽锤改造为电液锤的应用[J].热加工工艺，2011，40（19）：207-208.Wang S H. Application of electricity liquid hammer transformed form steam hammer [J]. Hot Working Technology, 2011，40（19）：207-208.
［2］何德誉.曲柄压力机[M].北京：机械工业出版社，1981.He D Y. Crank Press [M]. Beijing: China Machine Press, 1981.
［3］邹军.新型交流伺服直接驱动双点压力机设计理论及其关键技术的研究[D].西安：西安交通大学，2007.Zou J. Investigation in Design Theory and Key Technology of A New Type of Double Point Press Directly Driven by AC Servo-motor[D]. Xi'an: Xi'an Jiaotong University, 2007.
［4］王敏，方亮，赵升吨, 等.材料成形设备及自动化[M].北京：高等教育出版社，2010.Wang M, Fang L, Zhao S D, et al. Material Forming Equipment and Automation [M]. Beijing: Higher Education Press, 2010.
［5］郝滨海，张勇,夏思淝，等.高能螺旋压力机离合器功能分析[J].锻压技术，2002，27（2）：45-47.Hao B H, Zhang Y, Xia S F，et al. Computer simulation analysis of the clutch controlling screw press [J]. Forging & Stamping Technology, 2002，27（2）：45-47.
［6］郝永江.变频高速压力机新型传动机构及动态特性的研究[D].西安：西安交通大学，2007.Hao Y J. Research on Variable-frequency High Speed Press Machine's New Drive Mechanism and Dynamic Characteristic [D]. Xi'an: Xi'an Jiaotong University, 2007.
［7］马海宽.大型覆盖件冲压用JS39-1600交流伺服压力机及其关键技术的研究[D].西安：西安交通大学，2007.Ma H K. Research of Large Stamping JS39-1600 AC Servo Press and Its Key Technology [D]. Xi'an: Xi'an Jiaotong University, 2007.
［8］李忠民，卢喜, 刘雨耕,等.热模锻压力机[M].北京：机械工业出版社，1990.Li Z M, Lu X, Liu Y G, et al. Hot Die Forging Press [M]. Beijing: China Machine Press, 1990.
［9］孙友松，周先辉, 黎勉,等. 交流伺服压力机及其关键技术[J].锻压技术，2008,33（4）：1-8.Sun Y S, Zhou X H, Li M, et al. AC servo presses and their key techniques [J]. Forging & Stamping Technology, 2008,33（4）：1-8.
［10］赵婷婷，贾明全,姜则东，等.新型开关磁阻伺服压力机传动系统设计[J].锻压技术，2008,33（1）：112-115.Zhao T T, Jia M Q, Jiang Z D, et al. Drive system design of new servo crank presses with switched reluctance [J].Forging & Stamping Technology, 2008,33（1）：112-115.
［11］孙友松，周先辉, 黎勉,等. 交流伺服压力机及其应用[J]. 金属加工(热加工)，2008,（Z1）：93-98.Sun Y S, Zhou X H, Li M, et al. AC servo press and its application [J]. Metal Working, 2008,（Z1）：93-98.
［12］谢满垣.伺服压力机与传统压力机的对比及其优势[J]. 机电工程技术，2012,（8）：232-234.Xie M H. Comparison and advantage between servo press and traditional press [J]. Mechanical & Electrical Engineering Technology, 2012,（8）：232-234.
［13］赵婷婷，贾明全,王浩，等.开关磁阻电机驱动螺旋压力机能量系统设计[J].锻压技术，2009,34（3）：110-112.Zhao T T, Jia M Q, Wang H，et al. Energy system design of screw presses driven by switched reluctance motor [J]. Forging & Stamping Technology, 2009,34（3）：110-112.
［14］赵婷婷，贾明全，姜则东，等.新型开关磁阻伺服压力机传动系统设计[A]. 第十届全国塑性工程学术年会和第三届国际塑性加工先进技术研讨会论文集[C]. 南昌,2007. Zhao T T, Jia M Q, Jiang Z D, et al. Drive system design of new servo crank presses with switched reluctance [A]. The Tenth Session of National Plastic Engineering Conference and the Third International Plastic Advanced Processing Technology Symposium[C]. Nanchang, 2007.
［15］闵建成，闫长海, 祁长洲, 等. 伺服压力机的特点与应用[J]. 金属加工（热加工），2010,（23）：6-10.Min J C, Yan C H, Qi C Z, et al. Characteristics and application of servo press [J]. Metal Working, 2010,（23）：6-10.
［16］张同同.250吨数控伺服压力机传动机构运动特性及机架有限元分析[D].长春：吉林大学，2013.Zhang T T. Motion Characteristics Analysis of Transmission Mechanism and Finite Element Analysis of Frame of 250 Tons CNC Servo Press [D].Changchun: Jilin University, 2013.
［17］Tokuz L C.A design guide for hybrid machine application[J].Journal of Engineering and Environment Science,1997,(21):1-11.
［18］谢嘉，赵升吨, 沙郑辉, 等.用于机械压力机驱动的电动机发展趋势探讨[J].锻压装备与制造技术，2009,44（12）：13-17.Xie J, Zhao S D, Sha Z H, et al. Study on development of motor in drive system for mechanical press [J]. China Metalforming Equipment & Manufacturing Technology, 2009,44（12）：13-17.
［19］尚万峰.开关磁阻电动机伺服驱动新型机械压力机的关键技术研究[D].西安：西安交通大学，2007.Shang W F. Research on Key Techniques of Press Driven by Switched Reluctance Motor [D]. Xi'an: Xi'an Jiaotong University, 2007.
［20］孙友松，李振石.伺服驱动智能型数控曲柄压力机：中国，20030118186.8[P].2003-11-18.Sun Y S, Li Z S. Intelligent CNC servo driven crank press: China, 20030118186.8[P].2003-11-18.
［21］吕言，周建国, 阮澍,等.最新伺服压力机的开发以及今后的动向[J].锻压装备与制造技术，2006,41（1）：11-14.Lv Y, Zhou J G, Ruan S, et al. The newest development of servo press and future [J]. China Metalforming Equipment & Manufacturing Technology, 2006,41（1）：11-14.
［22］Peper H. More flexibility: servo as standard [J]. TEC Trends-Schuler Special Edition, 2006, (10): 121-125.
［23］商思岳.台湾锻压机床行业研究与借鉴[J].锻压装备与制造技术，2005,40（3）：25-27.Shang S Y. Study and reference about the Taiwan forging machine tool industry [J]. China Metalforming Equipment & Manufacturing Technology, 2005,40（3）：25-27.
［24］莫健华,张宜生,吕言，等.数字伺服压力机技术的现状与发展[A]. 2009年促进中部崛起专家论坛暨第五届湖北科技论坛——装备制造产业发展论坛论文集（下）[C]. 武汉,2009. Mo J H, Zhang Y S, Lv Y，et al. Present situation and development of digital servo press technology [A]. 2009 to Promote the Expert Forum and the Fifth Session of the Hubei Science and Technology Forum-Development of Equipment Manufacturing Industry Set the Rise of Central China(Below) [C].Wuhan, 2009.
［25］赵升吨，张宗元, 张贵成, 等.回转头压力机交流伺服直驱方式的研究[J].锻压装备与制造技术，2013，48(6)：19-22.Zhao S D, Zhang Z Y, Zhang G C, et al. Research of AC servo direct driving system of CNC turret punch press [J]. China Metalforming Equipment & Manufacturing Technology, 2013，48(6)：19-22.

Service：

【This site has not yet opened Download Service】【Add Favorite】