［1］Lu Hongzhou, Ma Mingtu, You Jianghai,et al. Dent resistance for automobile body panels [J]. Chinese Journal of Mechanical Engineering, 2009, 22(6):1-9.
［2］Holmberg S, Nejabat B. Numerical assessment of stiffness and dent properties of automotive exterior panels [J]. Materials and Design, 2004,25:361-368.
［3］王亮，李东升，陈连峰，等. 车身覆盖件抗凹性试验方法及系统[J]. 北京航空航天大学学报, 2014, 40(6): 742-748.Wang L, Li D S, Chen L F, et al. Dent resistance test method and system for auto-body panel[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(6): 742-748.
［4］Hua-Chu Shih，Curt D Horvath. Effects of material bending and hardening on static dent resistance[R]. Detroit, Michigan：SAE, 2003.
［5］Hua-Chu Shih，Curt D Horvath. Effects of material bending and hardening on dynamic dent resistance[R]. Detroit, Michigan：SAE, 2005.
［6］龙安，吴青松，祝洪川，等. 基于Autoform的汽车用钢抗凹性模拟研究[J]. 热加工工艺, 2014, 43(20): 66-80.Long A, Wu Q S，Zhu H C, et al. Research on simulation of dent resistance of automobile steel based on Autoform [J]. Hot Working Technology, 2014, 43(20): 66-80.
［7］Li Y, Wang Z J. Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming [J]. Transaction of Nonferrous Metals Society of China, 2009, 19: 312-317.
［8］张钧萍, 马鸣图, 方刚,等. 铝合金板材抗凹性能研究[J]. 中国工程科学, 2014, (1): 108-112.Zhang J P, Ma M T, Fang G,et al. Research on dent resistance property of aluminum alloy sheets[J]. Engineering Sciences, 2014, (1): 108-112.
［9］Ekstrand. Gunnar, Asnafi, et al. On testing of the stiffness and dent resistance of autobody panels [J]. Materials and Design, 1998, 19(4): 145-156.
［10］Shi M, Brindza J, Michel P, et al. Static and dynamic dent resistance performance of automotive steel body panels[R]. Detroit, Michigan：SAE, 1997.
［11］Gunnarsson L, Schedin E. Improving the properties of exterior body panels in automobiles using variable blank holder force [J]. Journal of Materials Processing Technology, 2001, 114: 168-173.
［12］Holmberg S, Thilderkvist P. Inuence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels [J]. Material and Design, 2002, 23: 681-691.
［13］Daud A R, Wong Karen M C. The effect of cerium additions on dent resistance of Al-0.5Mg-1.2Si-0.25Fe alloy for automotive body sheets [J]. Materials Letters, 2004, 58: 2545-2547.
［14］Li D, Zhou X, Lu X. Evaluation system of sinking-resistance for auto-body sheet material [J]. Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(5): 467-470.