Transactions of Materials and Heat Treatment

Title：Design platform of ball spinning process for inner-screw copper tube with big helix angle

Authors： Meng Yanmin Liu Jinsong

Unit： Foshan Radio and Television University Shenyang Ligong University

KeyWords： inner-serew copper tube with big helix angle ball spinning forming die tooth shape parameters

ClassificationCode：TG335.7

year,vol(issue):pagenumber：2015,40(6):67-70

Abstract：

It is a complicated ball spinning process to design the forming dies of inner-screw copper tube with big helix angle. At present there is no accurate calculation method for the system. A design platform of forming process was built and the intelligent design of the forming die was realized by an inverse method based on the standard of the inner-screw copper tube from the die with fixed diameter to deduce the reference data of ball diameter, rolling ring, thread core, reduce diameter die and tube billet. The forming process of inner-screw copper tube Φ7 mm×0.24 mm×0.15 mm with big helix angle was designed by object-oriented program design method, and the forming die and forming process parameters were obtained. The above optimized data were used in the production successfully to gain the good parameters of tooth shape tube without the tooth shape defect and meet its technical requirements.

Funds：

国家自然科学基金资助项目(50474059)

孟艳敏(1967-),女,硕士,讲师,工程师

Reference：

［1］王凯，王学印. 齿形参数对内螺纹铜管换热及阻力性能的影响[J]. 制冷与空调，2006， (4)：52-54. Wang K,Wang X Y. The impact of tooth parameters on heat transfer and pressure drop performance of inner-thread copper tube[J]. Refrigeration and Air Conditioning，2006，(4)：52-54.
［2］董志强，郭宏林，蔡运亮，等. 内螺纹铜管齿形参数对传热性能的影响[J]. 制冷与空调，2009，(12)：35-38.Dong Z Q,Guo H L，Cai Y L,et al. Influence of tooth profile parameters of inner- grooved copper tube on heat transfer performance[J]. Refrigeration and Air Conditioning，2009，(12)：35-38.
［3］周永利. 内螺纹铜管生产技术发展状况[J]. 有色金属加工，2001， (12)：42-46.Zhou Y L. The current situation and development of the production technology for fabricating inner-grooved copper tube[J].Non-ferrous Metal Processing，2001，(12)：42-46.
［4］于克桂.内螺纹铜管成型的工艺设计[J]. 湖南有色金属，2008， (4)：46-49,80.Yu K G . Technology design of inner grooved copper tube forming[J]. Hunan Non-Ferrous Metal，2008，(4)：46-49,80.
［5］冯振国. 影响大螺旋角内螺纹管成型的因素分析[J]. 有色金属加工，2010， (12)：43-45.Feng Z G . The key process parameters of making inner-grooved copper tube with big helix angle[J]. Non-Ferrous Metal Processing，2010，(12)：43-45.
［6］于恩林，于凤琴，于秉强，等. 内螺纹管材拉拔力能及工具参数的研究[J]. 焊管，2001， (11)：5-8.Yu E L,Yu F Q,Yu B Q,et al. Analysis of parameters of pulling forces and tools on inner grooved tube[J]. Welded Pipe and Tube，2001，(11)：5-8.
［7］刘劲松，叶能永，张士宏，等. TP2内螺纹铜管滚珠旋压成形缺陷模拟与分析[J]. 锻压技术,2011,36(5):46-50.Liu J S,Ye N Y,Zhang S H，et al. Finite element simulation and analysis of ball spinning defects of TP2 inner-grooved copper tubes[J]. Forging & Stamping Technology，2011，36(5)：46-50.

Service：

【This site has not yet opened Download Service】【Add Favorite】