Transactions of Materials and Heat Treatment

Title：Progressive die design for plate punching, cutting and bending processes

Authors： WEN Jian-ping

Unit： Hengyang Finance Economics and Industry Vocational College

KeyWords： plate progressive dies punching cutting bending

ClassificationCode：TG386

year,vol(issue):pagenumber：2012,37(4):90-93

Abstract：

According to the application and structure characteristics of the plate product, the stamping procedure was analyzed. The less waste layout was adopted to reduce the production cost. The parallel bilateral mold edge was used to ensure the part dimensions; the mobile structure was used to solve the bending and cutting problems. The characteristics of mold structure, work processes and design elements were introduced. The mold structure is simple, reliable, and has a high efficiency, which achieves very good economic benefits.

Funds：

文建平（1962-），男，本科，高级实验师

Reference：

［1］翁其金.冲压工艺与冲模设计[M].北京：机械工业出版社，2007.
［2］肖祥芷、王孝培.中国模具工程大典：第4卷冲压模具设计[M].北京：电子工业出版社，2007.
［3］罗益旋.最新冲压新工艺新技术及模具设计实用手册[DB/CD].沈阳：银声音像出版社，2004.
［4］梁炳文.实用板金冲压工艺图集[M]. 北京：机械工业出版社，1991.
［5］曾霞文,徐政坤.冷冲压工艺及模具设计[M].长沙：中南大学出版社，2008.
［6］王春香.弹簧卡多工位级进模设计[J].锻压技术, 2010,35(3): 124-127.
［7］戴茂良.锁片多工位级进模的设计[J].锻压技术, 2009,34(6): 88-90.
［8］赵战峰，康俊远，关余杰.电机转子、定子冲压工艺分析及级进模具设计[J].锻压技术, 2010,35(1):106-109.
［9］匡余华.引弧片级进模排样与变形控制分析[J].锻压技术, 2010,35(3): 122-123.
［10］王哲英,王可,姜杰.智能卡板的冲压工艺与级进模设计[J].锻压技术, 2010,35(6): 92-94.

Service：

【This site has not yet opened Download Service】【Add Favorite】