|
In order to analyze the temperature distribution of porthole die in extrusion process for automobile aluminum alloy, FEM was employed based on the principle of rigid plastic. The influences of extrusion speed and friction on temperature field in different directions (parallel and perpendicular to extrusion direction) were studied, and the feature points were selected in welding position to research its temperature distribution. The numerical results show that the difference between the maximum and the minimum temperature is from 7 to 8 ℃ in the X direction and from 9 to 10 ℃ in the Y direction respectively under an initial temperature of the billet 450 ℃, the friction factor 0.3, extrusion speed from 1 to 3 mm·s-1. Through the analysis on the temperature field，it is found that the temperature of the feature points near extrusion cylinder wall with good heat dissipation conditions declines to some extent. However, the temperature of some feature points in the internal declines a little, and there is different heat exchange between points and blank heat. Thus, the temperature declines slightly, and the abnormal rise happens in some points.
|
|
[1]Liu J, Lin G Y, Feng D, et al. Effects of process parameters and die geometry on longitudinal welds quality in aluminum porthole die extrusion process [J]. Journal of Cetral South University of Technology, 2010，（17）: 688-696.
[2]Zhang X P, Dong X H, Feng S F, et al. Experimental and finite-element method study of Zn-22Al alloy pipe hot extrusion using a porthole die [J]. Journal of Materials Engineering and Performance, 2013，22(11): 3296-3305.
[3]He Y F, Xie S S, Cheng L, et al. FEM simulation of welding quality in porthole die extrusion [J]. Journal of Wuhan University of Technology: Material Science Edition, 2011,26(2): 292-295.
[4]Zhao G Q, Chen H, Zhang C S, et al. Multiobjective optimization design of porthole extrusion die using Pareto-based genetic algorithm [J]. The International Journal of Advanced Manufacturing Technology, 2013,69: 1547-1556.
[5]Zhang C S, Zhao G Q, Chen H, et al. Numerical simulation and metal flow analysis of hot extrusion process for a complex hollow aluminum profile [J]. The International Journal of Advanced Manufacturing Technology, 2012,60: 101-110.
[6]Zhang C S, Zhao G Q, Chen H, et al. Optimization of an aluminum profile extrusion process based on Taguchis method with S/N analysis [J]. Neural Computing & Application, 2001,10: 39-47.
[7]Reggiani B, Segatori A, Donati L, et al. Prediction of charge welds in hollow profiles extrusion by FEM simulations and experimental validation [J]. The International Journal of Advanced Manufacturing Technology, 2013,69: 1855-1872.
[8]Ambrogio G, Gagliardi F. Design of an optimized procedure to predict opposite performances in porthole die extrusion[J]. Neural Computing & Application, 2013,23: 195-206.
[9]杨志高，徐永礼，庞祖高，等. 基于Deform-3D方管铝合金型材等温挤压的变速挤压数值模拟 [J]. 锻压技术，2015, 40(4): 152-157.
Yang Z G, Xu Y L, Pang Z G. Numerical simulation of variable speed extrusion for isothermal extrusion process of aluminum alloy square tube based on Deform-3D [J]. Forging & Stamping Technology, 2015, 40(4): 152-157.
[10]黄东男，孙玉国，马玉，等. 断面分流比对双孔分流模挤压方管焊合过程及焊合质量的影响 [J]. 锻压技术，2014, 39(11): 112-116.
Huang D N, Sun Y G, Ma Y, et al. Influence of area ratio of portholes on welding process and quality during the extrusion of square tube by a porthole die [J]. Forging & Stamping Technology, 2014, 39(11): 112-116.
[11]侯文荣, 张志豪, 谢建新, 等. 铝合金空心型材分流模挤压成形全过程温度场的数值模拟 [J]. 中国有色金属学报, 2013,(10): 2769-2778.
Hou W R, Zhang Z H, Xie J X, et al. Numerical simulation of temperature field duringwhole extrusion process of aluminum hollow profile withporthole die extrusion forming [J]. The Chinese Journal of Nonferrous Metals, 2013,(10): 2769-2778.
|
Copyright Forging & Stamping Technology.All rights reserved