Transactions of Materials and Heat Treatment

Title：Study on rapid fitting method for trimming insert curve based on circle rolling

Authors： Tao Wen Zhang Zhibing Liu Yuqi

Unit： Huazhong University of Science & Technology

KeyWords： rolling circle curve fitting R-curve trimming insert

ClassificationCode：TP391.7

year,vol(issue):pagenumber：2016,41(6):150-155

Abstract：

For the problem of low efficiency of manual processing and unevenness of wall thickness caused by automated method in the smoothing process of trimming insert curve for the trimming die, the algorithm about the curve rapid fitting method based on circle rolling was developed, and the process of manual processing by designer was completed automatically. The concept of R-curve was defined by extracting the center point translation and rotating track in the process of rolling, and dynamic kinematics problem was successfully converted into a static contact problem in the process of translation and rotation simulation, which not only reduced the algorithm complexity, but also improved the stability of curve fitting. By comparing with the curve processing method provided by CATIA platform, the result shows the algorithm greatly reduces the processing time and has a considerable practical value.

Funds：

基金项目:国家自然科学基金资助项目(51275184)

作者简介：陶文（1990-），男，硕士研究生 E-mail：husttw@163.com 通讯作者：章志兵（1978-），男，博士，讲师 E-mail：zhangzb@hust.edu.cn

Reference：

［1］崔令江.汽车覆盖件冲压成形技术[M].北京：机械工业出版社，2003.Cui L J. Automotive Covering Parts Forming Technology [M]. Beijing: China Machine Press, 2003.

［2］龚科家，李运兴，郭威，等. 面向 CAE 的汽车覆盖件模面设计中零件边界光顺技术[J].吉林大学学报,2006,36(3): 75-78.Gong K J, Li Y X, Guo W, et al. Contour smooth technique in CAE-oriented die-face design for automotive panel [J]. Journal of Jilin University, 2006, 36(3): 75-78.

［3］狄驰,赵磊. 基于蒙皮法的零件边界光顺方法[J].东北电力大学学报,2013,33(3):27-30.Di C, Zhao L. Parts boundary smoothing method based on skinning surface [J]. Journal of Northeast Dianli University, 2013, 33(3): 27-30.

［4］鲍镜如，张向奎，胡平，等. 基于Offset技术的汽车覆盖件边界光顺方法[J]. 机械工程学报,2012,48(12):81-87.Bao J R, Zhang X K, Hu P, et al. Smoothing method for automotive panels based on offset technique [J]. Journal of Mechanical Engineering, 2012, 48(12): 81-87.

［5］刘瑞军.覆盖件冲压模具型面参数化仿真设计方法与关键技术研究[D].长春：吉林大学，2010.Liu R J. Research on Methods & Several Key Techniques of Parametric Simulation Design for Panel Stamping die Face[D]. Changchun: Jilin University, 2010.

［6］郝跃宏.基于四叉树和波前法的混合网格划分算法的研究和实现[D]. 南京：南京航空航天大学，2007.Hao Y H. Research and Implement of Surfaces Mesh Generation Algorithm Based on Quadtree and Advancing Front Technique[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007.

Service：

【This site has not yet opened Download Service】【Add Favorite】