|
The macro model and micro model are of the same deformation process in the upsetting process, namely, the time spent on the same amount of upsetting is equal. Then, the amount of upsetting in the macroscopic model corresponding the shrinkage closure in the representative feature body was used to determine the closure order of shrinkage in the region of these feature points. The upsetting model was established by the software DEFORM-2D. Due to the workpiece with symmetry, the limited feature points on the workpiece were selected, so the finite element simulation was carried out by changing the temperature, strain rate and shrinkage size. Furthermore, the appropriate amount of upsetting was selected, and it was found that the influence of temperature and shrinkage size on the closure order of each feature point was relatively small, but the variation of strain rate made the feature point closure order change significantly. In comparison with the actual condition, the deformation zone was basically identical under the same condition. Thus, the closed order of shrinkage in different deformation zones under various forming environment was verified.
|
|
［1］王建军,郝素兰,潘露,等.锻造过程中孔洞缺陷的闭合过程模拟分析[J].鸡西大学学报,2015,(12):52-54.Wang J J, Hao S L, Pan L, et al. The simulation analysis of void defects closure in the forging process[J].Journal of Jixi University, 2015,(12):52-54.
［2］俞汉青，陈金德.金属塑性成形原理[M].北京:机械工业出版社,1999.Yu H Q, Chen J D. Principle of Metal Plastic Forming[M].Beijing: China Machine Press, 1999.
［3］李妍.大锻件镦粗成形中内部空洞型缺陷的演化规律研究[D].上海:上海交通大学,2009.Li Y. Research on Evolution of Void Defects in Heavy Forgings during Upsetting Process[D].Shanghai: Shanghai Jiao Tong University,2009.
［4］夏立芳，张振信.金属中的扩散[M].哈尔滨:哈尔滨工业大学出版社,1989.Xia L F, Zhang Z X. Diffusion in Metals[M].Harbin: Harbin Institute of Technology Press, 1989.
［5］吴永强.镦粗过程中孔洞压实的细观有限元分析[D].太原:太原科技大学,2011.Wu Y Q. Finite Element Analysis of Voids in the Compacted Upsetting Process[D].Taiyuan: Taiyuan University of Science and Technology,2011.
［6］Luo C. Evolution of voids close to an inclusion in hot deformation of metals[J]. Computational Materials Science, 2001, 21(3):360-374.
［7］刘家信.关于塑性力学中的Lode参数[J].东北重型机械学院学报,1987,11(1):70-78.Liu J X. Lode parameters in plastic mechanics[J].Journal of Northeast Heavy Machinery Institute，1987,11(1):70-78.
［8］马庆贤,钟约先,曹起骧.高温塑性加工过程中裂纹损伤与修复特性研究[J].塑性工程学报,2000,7(2): 58-61.Ma Q X, Zhong Y X, Cao Q X. Study on the properties of cracks damage and recovery in high-temperature processes of plastic deformation[J].Journal of Plasticity Engineering,2000,7(2): 58-61.
［9］马庆贤,钟约先,曹起骧.高温塑性加工过程中缺陷修复规律[J].清华大学学报,1999,39(11):94-96.Ma Q X, Zhong Y X, Cao Q X. Principle of internal defects recovery in processes of high-temperature plastic deformation[J].Journal of Tsinghua University,1999,39(11):94-96.
［10］马庆贤,钟约先,曹起骧.锻件夹杂性缺陷的形成及控制锻造工艺[J].清华大学学报,2000,40(5):13-15,32.Ma Q X, Zhong Y X, Cao Q X. Forming of inner faults originating from inclusions in the heavy forgings and the process of forging control[J].Journal of Tsinghua University,2000,40(5):13-15,32.
［11］李振环,匡震邦.考虑三轴约束时孔洞的聚合机理及其有效能量准则[J].力学学报,2000,32(4):428-438.Li Z H, Kuang Z B. The mechanism and its effective energy criterion of void coalescence under different stress triaxiality[J].Chinese Journal of Theoretical and Applied Mechanics,2000,32(4):428-438.
|
Copyright Forging & Stamping Technology.All rights reserved