［1］隽海昌，李廷强，杜建，等. 家用空调热交换器的发展[J]. 制冷与空调，2012，(2)：12-17.Juan H C, Li T Q, Du J, et al. The development of household air conditioner heat-exchanger[J]. Refrigeration and Air-Conditioning, 2012，(2)：12-17.
［2］刘援，王雷，韵晋琦. 中国房间空气调节器行业节能减排潜力分析[J]. 气候变化研究进展，2015, 11(3)：206-211.Liu Y, Wang L, Yun J Q. Analysis of energy efficiency and emission reduction potentials of room air conditioning sector of China[J]. Progressus Inquisitiones de Mutatione Climatis, 2015, 11(3)：206-211.
［3］靳林宝. 空调铝箔翅片成型过程缺陷简析[J]．轻合金加工技术，2011，39 (5): 55-57．Jin L B．Analysis on the defects produced during the aluminum foil fin for the air conditioner performing[J]. Light Alloy Fabrication Technology，2011，39 (5): 55-57.
［4］胡玄通，夏琴香，龙晓彬，等. 空调换热器翅片多工位级进模设计[J]．模具制造，2013，13 (11) : 10-14．Hu X T, Xia Q X, Long X B, et al. Design of multi-position progressive die for heat exchanger fin of air conditioner[J]. Mold Manufacturing, 2013，13 (11) : 10-14．
［5］熊盛勇，夏琴香，陈亚兵，等. 基于数值模拟的空调换热器翅片多道次级进拉深成形过程研究[J]. 锻压技术，2015，40(1): 27-32.Xiong S Y, Xia Q X, Chen Y B, et al. Research on multi-step progressive drawing of conditioner heat exchanger fin based on numerical simulation[J]. Forging & Stamping Technology, 2015，40(1): 27-32.
［6］杨守军， 陈政弘，王红彬，等. 球底筒形件表面摩擦系数对拉深成形影响的数值模拟[J]. 锻压装备与制造技术，2014，49(6): 62-65.Yang S J, Chen Z H, Wang H B, et al. Numerical simulation of effect of friction coefficient about the spherical bottomed cylindrical parts surface on deep drawing process[J]. China Metalforming Equipment & Manufacturing Technology, 2014，49(6): 62-65.
［7］罗亚军，汪锐，何丹农，等. 板料拉深成形过程中摩擦系数的确定[J]. 上海交通大学学报，2015，35(7): 969-971.Lou Y J, Wang R, He D N, et al. Determination of friction coefficient in sheet metal deep drawing[J]. Journal of Shanghai Jiaotong University，2015，35(7): 969-971.
［8］崔国栋. 空调器散热片用铝箔的开发与质量控制[J]. 家用电器科技, 2000, (11):49-52.Cui G D. Devolopement and quality control of aluminum foils of conditioner heat-exchanger[J]. Science and Technology of Household Electric Appliance，2000, (11): 49-52.
［9］管连仲. 空调铝箔成形性研究及翅片冲压缺陷分析[D]. 长沙：中南大学，2002.Guan L Z. Study on Forming Conditioner Aluminum Foils and Stumping Defect Anlysis[D]. Changsha：Central South University，2002.
［10］GB/T 228.1—2010，金属材料拉伸试验第1部分：室温试验方法[S].GB/T 228.1—2010，Metallic materials—Tensile testing—Part 1: Method of test at room temperature[S].
［11］Barlat F, Lian K. Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions[J]. International Journal of Plasticity, 1989, 5(1): 51-66.
［12］王敬伟. 基于DYNAFORM的AZ31鎂合金零件拉深成形过程模拟与预测[D]．太原: 太原理工大学，2012．Wang J W．Research on the Simulation and Prediction of the Deep Drawing Process of AZ31 Magnesium Alloy Sheet based on Dynaform[D]．Taiyuan: Taiyuan University of Technology，2012．
［13］夏琴香，魏光明，叶福源，等. 多工位级进冲压全工序数值模拟关键技术研究[J]．华南理工大学学报，2012，40(7):62-66．Xia Q X，Wei G M，Ye F Y，et al．Investigation into key technologies of numerical simulation of whole process chain during multi-position progressive stamping [J]. Journal of South China University of Technology，2012，40(7) : 62-66．
［14］陈伟，赵丕植，邹立颖，等. Fe含量对连续铸轧AA8079合金箔材晶粒组织和拉伸性能的影响[J]. 有色金属加工, 2015，44(4):14-18．Chen W, Zhao P Z, Zou L Y, et al. Effects of Fe content on grain structure and tensile properties of continuous casting AA8079 aluminum foil[J]. Nonferrous Metals Processing，2015，44(4) :14-18．
［15］叶茂. 金属塑性加工中摩擦润滑原理及应用[M]. 沈阳：东北工学院出版社，1990．Ye M. The Principle and Application of Friction and Lubrication in Metal Plastic Processing [M]. Shenyang: Northeastern University of Technology Press，1990．