［1］Huang C，Dean T A，Loretto M H. Deformation behaviour of Ti-25Al-10Nb-3V-1Mo(super α)during isothermal forging[J]. Materials Science and Engineering A,1996,208:166-171.

［2］Si J Y, Han P B, Zhang J. Design for isothermal forging of Ti-46.5Al-2.5V-1.0Cr-0.3Ni alloy[J]. Journal of Iron and Steel Research,2010,17(8):67-73.

［3］Yang H, Zhan M, Liu Y. A 3D rigidviscoplastic FEM simulation of the isothermal precision forging of a blade with a damper platform[J]. Journal of Materials Processing Technology, 2002, 122(1):45-50.

［4］Zhan M, Liu Y, Yang H. A 3D rigidviscoplastic FEM simulation of compressor blade isothermal forging[J]. Journal of Materials Processing Technology, 2001, 117(1-2):56-61.

［5］Dutta A, Rao A V. Simulation of isothermal forging of compressor disc by combined numerical and physical modelling techniques[J]. Journal of Materials Processing Technology, 1997, 72(3):392-395.

［6］Li X L，Li M Q. A set of microstructure-based constitutive equations in hot forming of a titaniumalloy[J]. Journal of University Science and Technology，2006，13(5)：435-441.

［7］Krumphals A, Poletti C, Warchomicka F, et al. Modeling of dualphase grain structure in Ti-6Al-4V during isothermal and nonisothermal heat treatment using cellular automata[J]. Materials Science Forum,2013，753:353-356.

［8］Paul J D H, Lorenz U, Oehring M, et al. Up-scaling the size of TiAl components made via ingot metallurgy[J]. Intermetallics, 2014, 32(1):318–328.

［9］Gaisin R A, Imayev V M, Imayev R M, et al. Microstructure and hot deformation behavior of two-phase boron-modified titanium alloy VT8[J]. The Physics of Metals and Metallography, 2013, 114(4):339-347.

［10］Huang S H, Zong Y Y, Shan D B. Application of thermohydrogen processing to Ti6Al4V alloy blade isothermal forging[J]. Materials Science & Engineering A，2013，561(3):17-25.

［11］郭拉凤，朱艳春，孔虎星，等. 钛合金复杂构件等温锻造工艺研究[J].稀有金属，2012， 36（2）:357-362.

Guo L F, Zhu Y C, Kong H X, et al. Isothermal forging process of titanium alloy complex components[J]. Chinese Journal of Rare Metals, 2012, 36(2):357-362.

［12］朱磊，张麦仓，董建新，等.TC11合金本构关系的建立及其在盘件等温锻造工艺设计中的应用[J].稀有金属材料与工程，2006,35（2）：253-256.

Zhu L, Zhang M C, Dong J X,et al. Constitutive relationship of TC11 alloy and its application in hot die forging process of disc component using finite element method[J].Rare Metal Materials and Engineering, 2006,35(2):253-256.

［13］李成功，曾凡昌. 俄国等温锻造技术的进展[J].航空科技技术，1996，（5）：32-35.

Li C G, Zeng F C. Progress isothermal forging technology in Russia[J]. Aeronautical Science & Technology，1996,(5):32-35.

［14］郭鸿镇, 姚泽坤, 虢迎光,等. 等温精密锻造技术的研究进展[J]. 中国有色金属学报, 2010, 20(S1):593-599.

Guo H Z, Yao Z K, Guo Y G,et al. Research progress of isothermal precision forging technology[J].The Chinese Journal of Nonferrous Metals, 2010,20(S1):593-599.

［15］Hua L, Zuo Z J, Lan J, et al. Research on following motion rule of guide roller in cold rolling groove ball ring[J]. Journal of Materials Processing Technology, 2007, 187-188(12):743-746.

［16］Guo L，Yang H. Research on plastic deformation behavior in cold ring rolling by FEM numerical simulation[J]. Modeling and Simulation in Materials Science and Engineering，2005，13(7)：1029-1046.

［17］Wang M, Yang H, Zhang C, et al. Microstructure evolution modeling of titanium alloy large ring in hot ring rolling[J]. The International Journal of Advanced Manufacturing Technology, 2013, 66(9):1427-1437.

［18］Wang M，Yang H，Guo L，et al. Effects and optimization of roll sizes in hot rolling of large rings of titanium alloy[J]. Rare Metal Materials and Engineering，2009，38(3)：393-397.

［19］Jone T Y, Jeoung H K, Nho K P, et al. Ringrolling design for a largescale ring product of Ti-6Al-4V alloy[J]. Journal of Materials Processing Technology,2007,187-188(12):747-751.

［20］Tiedemann I, Hirt G, Kopp R, et al. Material flow determination for radial flexible profile ring rolling[J]. Production Engineering, 2007,1(3):227-232.

［21］Li L, Yang H, Guo L, et al. Research on interactive influences of parameters on Tshaped cold ring rolling by 3DFE numerical simulation[J]. Journal of Mechanical Science and Technology, 2007, 21(10):1541.

［22］Zhu S, Yang H, Guo L G, et al. Investigation of deformation degree and initial forming temperature dependences of microstructure in hot ring rolling of TA15 titanium alloy by multiscale simulations[J]. Computational Materials Science, 2012, 65:221-229.

［23］郭良刚，杨合，邸伟佳，等.TC4钛合金薄壁带筋锥形环辗轧充填规律[J]. 航空学报，2015,36（8）：2798-2806.

Guo L G, Yang H, Di W J, et al. Filling rules in thinwalled and ribbed conical ring rolling for TC4 titanium alloy[J]. Acta Aeronauticaet Astronautica Sinica, 2015,36(8):2798-2806.

［24］Wang M, Yang H, Zhang C, et al. Microstructure evolution modeling of titanium alloy large ring in hot ring rolling[J]. International Journal of Advanced Manufacturing Technology, 2013, 66(9-12):1427-1437.

［25］朱帅，杨合，郭良刚，等. TA15钛合金环件径轴向辗轧成形全过程组织演变模拟[J]. 航空学报，2014,35(11):3145-3155.

Zhu S, Yang H, Guo L G,et al. Simulation of microstructure evolution during the whole process of radialaxial rolling of TA15 titanium alloy ring[J]. Acta Aeronautica et Astronautica Sinica，2014,35(11):3145-3155.

［26］郭良刚，邸伟佳，杨合，等. 难变形材料环件双向辗轧过程轧制曲线设计方法[J].机械工程学报，2014，50（16）：83-88.

Guo L G, Di W J, Yang H,et al. Design method of rolling curve during radialaxial ring rolling process for difficulttodeform materials[J].Journal of Mechanical Engineering, 2014,50(16):83-88.

［27］石岩，赵国平，石南起. 环件轧制过程抱辊力差值的分析[J]. 热加工工艺，2015,44（1）：136-139.

Shi Y, Zhao G P, Shi N Q. Analysis on difference of guide roll pressure in ring rolling process[J]. Hot Working Technology, 2015,44(1):136-139.

［28］彭谦之，李建军，余三山，等.毛坯截面形状对L形截面异形环件轧制成形的影响[J]. 热处理技术与装备，2016,37（4）：30-33.

Peng Q Z, Li J J, Yu S S, et al. The effects of section shape of blank on the rolling process of Lsection profiled ring[J].Heat Treatment Technology and

Equipment, 2016, 37(4):30-33.

［29］张方, 窦忠林, 邹彦博. 航空锻造技术的应用现状及发展趋势[J]. 航空制造技术, 2015, (7):60-63.

Zhang F, Dou Z L, Zou Y B. Application status and development trend of aeronautical forging technology[J]. Aeronautical Manufacturing Technology,2015,(7):60-63.

［30］彭飞飞, 杨合, 孙志超,等. 钛合金大型复杂件预制坯成形工艺模拟研究[J]. 塑性工程学报, 2008, 15(5):47-52.

Peng F F, Yang H, Sun Z C,et al. Simulation on billet performing process of largescale complex part of titanium alloy[J]. Journal of Plasticity Engineering, 2008,15(5):47-52.

［31］唐泽, 杨合, 孙志超,等. TA15钛合金高温变形微观组织演变分析与数值模拟[J]. 中国有色金属学报, 2008, 18(4):722-727.

Tang Z, Yang H, Sun Z C,et al. Microstructure evolution and numerical simulation of TA15 titanium alloy during hot compressive deformation[J]. The Chinese Journal of Nonferrous Metals, 2008, 18(4):722-727.

［32］薛松. TA15钛合金大型航空结构件成形特性与工艺研究[D]. 重庆：重庆大学，2011.

Xue S. Study on the Forming Features and Process of Large Scale TA15 Titanium Alloy Aviation Structural Parts[D]. Chongqing: Chongqing University, 2011.

［33］杨刚. 大型钛合金航空结构件锻造模具设计与工艺研究[J].热加工工艺，2015,44（13）：137-143.

Yang G. Forging die design and technology research of large titanium alloy aerospace structure parts[J].Hot Working Technology, 2015,44(13):137-143.

［34］Li M Q, Chen D J, Xiong A M, et al. An adaptive prediction model of grain size for the forging of Ti6Al4V alloy based on fuzzy neural networks[J]. Journal of Materials Processing Technology, 2002, 123(3):377-381.

［35］Li M Q, Xiong A M, Huang W C, et al. Microstructural evolution and modelling of the hot compression of a TC6 titanium alloy[J].Materials Characterization, 2002,49(3):203-209.

［36］Brooks J W, Dean T A, Hu Z M, et al. Threedimensional finite element modeling of a titanium aluminide aero foil forging[J]. Journal of Materials Processing Technology, 1998,80-81(3): 149-155.

［37］熊爱明，薛善坤，李淼泉. TC4钛合金高温变形时微观组织变化的计算[J]. 塑性工程学报，2002,9（1）：14-16.

Xiong A M, Xue S K, Li M Q. Microstructure evolution and modeling during isothermal deformation of TC4 titanium alloy[J]. Journal of Plasticity Engineering, 2002,9(1):14-16.

［38］Li M Q, Xiong A M, Li X L. FE simulation of grain size and temperature rise during the forging of a commercial TC6 titanium alloy disc[J]. Journal of the Chinese Society of Mechanical Engineers,2005,26(5): 493-499.

［39］聂蕾.TC4合金的热模锻过程设计与质量控制[D]. 西安：西北工业大学，2002.

Nie L.Hot Die Forging Process Design and Quality Control of TC4 Alloy[D]. Xi′an: Northwestern Polytechnical University, 2002.

［40］Ding R,Guo Z X, Wilson A. Microstructural evolution of a Ti6Al4V alloy during thermo mechanical processing[J]. Materials Science & Engineering A, 2002,327(2):233-245.

［41］Yang H, Li Y L, Cai W, et al. Prediction of grain size for blade precision forging process under thermomechanical coupling[J]. Journal of Materials Science & Technology,2003,19(S1):156-158.