Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Test method and data processing for load spectrum of excavator bucket rod
Authors: Du Minjie Huang Xue Li Jun Wang Yuxin Liu Yaqun 
Unit: China Academy of Machinery Science & Technology 
KeyWords: excavator  bucket rod  load spectrum  experiments test  time domain analysis frequency domain analysis 
ClassificationCode:TU621
year,vol(issue):pagenumber:2017,42(8):107-114
Abstract:

To compile the load spectrum of hydraulic excavator bucket rod, the load spectrum test of hydraulic excavator bucket rod was proposed, and a kind of hydraulic excavator was tested. Then, the time history curve of cylinder pressure and cylinder lengthen and shorten in the typical working condition and ultimate working condition of the hydraulic excavator were collected. For the experimental data in digging rock conditions, the data were analyzed in time domain and frequency domain by Ncode, and the data were processed by removing trends and filtering. Furthermore, the force analysis of excavator working device was carried out, and the equations of equilibrium of force series were established. The time history curves of each hinge point force of bucket rod were obtained by the MATLAB. The hinge point force of bucket rod was periodic, and the loads of different working sections were different. Therefore, the stationary and ergodicity tests were carried out by taking the working section as a unit. Thus, the load spectrum compilation and indoor simulation experiment were prepared through the comparison and analysis of the data processing results.

Funds:
国家科技支撑计划(2015BAF07B00)
AuthorIntro:
杜敏杰(1991-),男,硕士研究生 黄雪(1963-),男,硕士,研究员
Reference:


[1]张英爽,王国强,王继新,等. 工程车辆传动系载荷谱编制方法[J].农业工程学报,2011,27(4):179-183.Zhang Y S, Wang G Q, Wang J X, et al. Compilation method of power train load spectrum of engineering vehicle[J]. Transactions of the CSAE, 2011,27(4):179-183.
[2]余盛. 液压挖掘机工作装置的疲劳寿命研究[D]. 济南:山东大学,2015.Yu S. Study on Fatigue Life of Hydraulic Excavator′s Working Device[D]. Ji′nan:Shandong University,2015.
[3]张聪惠,于飞,王耀勉,等. 表面机械研磨工业纯锆的疲劳性能研究[J]. 稀有金属,2017,41(3) :284-289.Zhang C H,Yu F,Wang Y M,et al. Fatigue property of commercial pure zirconium subjected to surface nanocrystallization[J]. Chinese Journal of Rare Metals,2017,41(3):284-289.
[4]刘志东,李莺莺,杨清淞,等. 挖掘机液压系统载荷数据测试方法研究[J]. 工程机械,2013,44(3):18-25.Liu Z D, Li Y Y, Yang Q S,et al. Research of method to test load data of excavator hydraulic system[J]. Construction Machinery and Equipment, 2013,44(3):18-25.
[5]林慕义, 史青录. 单斗液压挖掘机构造与设计[M]. 北京:冶金工业出版社,2011.Lin M Y,Shi Q L. Construction and Design of Single Bucket Hydraulic Excavator[M]. Beijing:Metallurgical Industry Press,2011.
[6]JCMAS H 020—2007,土方机械—液压挖掘机燃油消耗量—试验方法[S]. JCMAS H 020—2007,JCMAS Earth-moving machinery—Fuel consumption on hydraulic excavator —Test procedures[S].
[7]黄柱安,梁佳,宋续丁. 装载机传动系载荷谱测试方法及其数据处理[J]. 施工机械与管理,2016,(10):103-106.Huang Z A,Liang J,Song X D. Test method and data processing for load spectrum of transmission system of loader[J]. Construction Machinery and Management, 2016, (10):103-106.
[8]程珩,白瑞. 挖掘机工作装置疲劳寿命分析[J]. 振动、测试与诊断,2011,31(4):512-516.Cheng H,Bai R. Fatigue life prediction of the excavator working mechanism based on load history[J]. Journal of Vibration, Measurement & Diagnosis, 2011,31(4):512-516.
[9]姜涛,刘雄斌,周广萍. 实测载荷驱动下挖掘机动臂的疲劳寿命研究[J]. 中国工程机械学报,2014,12(3):265-271.Jiang T,Liu X B,Zhou G P. Fatigue life study on excavator booms under actual loading[J]. Chinese Journal of Construction Machinery, 2014,12(3): 265-271.
[10]宋海峰,许焕敏. 基于D-H法的挖掘机工作装置运动学分析[J]. 建筑机械,2012,(17):87-90.Song H F,Xu H M. Kinematical analysis of the excavator working device based on D-H methodology[J]. Construction Machinery,2012,(17):87-90.
[11]张英爽. 装载机传动系载荷谱的测取与应用研究[D]. 长春:吉林大学,2014.Zhang Y S. Research on the Load Spectra Acquisition and Application of Loader Powertrain [D]. Changchun:Jilin University, 2014.

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com