[1]Betzalel Avitzur. A personal look on my involvement in the recent history of metal forming research[A]. The Third International Conference on Technology of Plasticity (ICTP)[C]. Kyoto, 1990.

[2]张笑笑, 王雷刚, 黄瑶. 镀锌板冲压成形性的模拟与实验研究[J]. 锻压技术, 2011, 36(6):19-23.

Zhang X X, Wang L G, Huang Y. Simulation and experimental research of galvanized sheet stamping formability[J]. Forging & Stamping Technology, 2011, 36(6):19-23.

[3]Pitenis A A, Dowson D, Sawyer W G. Leonardo da Vinci′s friction experiments: An old story acknowledged and repeated[J]. Tribology Letters, 2014, 56(3): 509-515.

[4]Popova E, Popov V L. The research works of Coulomb and Amontons and generalized laws of friction[J]. Friction, 2015,3(2):183-190.

[5]Jennifer Bothamley. Dictionary of Theories: Coulomb′s Law of Electrostatic Force (1785) Physics [M]. United States: Detroit, 2002.

[6]Desaguliers J T. A Course of Experimental Philosophy[M]. London: Landmarks of Science, 1968.

[7]Bowden. The Theory of Shear Strength Limit of Junction Material[M]. Oxford: Oxford at the Clarenden Press, 1945.

[8]温诗铸, 黄平. 摩擦学原理[M]. 北京:清华大学出版社，2002.

Wen S Z, Huang P. Principles of Tribology[M]. Beijing: Tsinghua University Press, 2002.

[9]Suh N P. Fundamentals of Friction and Wear of Materials: Update Oil the Delamination Theory of Weal [M]. Ohio US: American Society for Metals, 1981.

[10]Eringen A C, Edelen D G B. On nonlocal elasticity[J]. International Journal of Engineering Science, 1972, 10(3):233-248.

[11]Eringen A C. Theories of nonlocal plasticity[J]. International Journal of Engineering Science, 1983, 21(7): 741-751.

[12]Oden J T, Pires E B. Nonlocal and nonlinear friction laws and variational principles for contact problems in elasticity[J]. Journal of Applied Mechanics, 1983, 50(1): 67.

[13]Pires E B, Trabucho L. The steady sliding problem with nonlocal friction[J]. International Journal of Engineering Science, 1990, 28(7): 631-641.

[14]Mahrenholtz O, Appeltauer J, Bontcheva N, et al. Nonlocal friction-application to rolling with spread [J]. Applied Mathematics and Mechanics-ZAMM, 1996, 76 (S4): 603-605.

[15]赵振铎, 许洪民, 张志红, 等. 金属板料塑性成形摩擦机理的力学模型探讨[J]. 塑性工程学报, 2003, 10(1): 52-56.

Zhao Z D, Xu H M, Zhang Z H, et al. Approach of mechanical model on frictional mechanism in metal sheet plastic deformation[J]. Journal of Plasticity Engineering, 2003, 10(1): 52-56.

[16]郑燕萍, 王列亮. 基于CAE的铝合金板料冲压成形中摩擦特性研究[J]. 锻压技术, 2015, 40(8): 114-119.

Zheng Y P, Wang L L. Research on friction characteristics in aluminum alloy sheet stamping based on CAE[J]. Forging & Stamping Technology, 2015, 40(8): 114-119.

[17]扈艳红. 铝合金润滑油添加剂及其摩擦化学机理的研究[D]. 兰州: 中国科学院兰州化学物理研究所, 1999.

Hu Y H. Investigation on Aluminum Alloy Lubricant Additives and Their Tribological Mechanism[D]. Lanzhou: Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 1999.

[18]章小峰, 张祥林, 王爱华, 等. 铝合金板成形中摩擦与润滑的研究进展[J]. 金属热处理, 2007, 32(12): 11-17.

Zhang X F, Zhang X L, Wang A H, et al. Research and development of friction and lubrication for aluminium alloy sheet forming[J]. Heat Treatment of Metals, 2007, 32(12): 11-17.

[19]Lee E J, Hwang H J, Lee W G. Morphology and toughness of abrasive particles and their effects on the friction and wear of friction materials: A case study with Zircon and Quartz[J]. Tribology Letters, 2010, 37(3): 637-644.

[20]Kobayashi S, Oh S I, Altan T, et al. Metal forming and the finite element method[J]. Journal of Materials Shaping Technology, 1990, 8(1): 65-65.

[21]Bay N. Friction stress and normal stress in bulk metalforming processes[J]. Journal of Mechanical Working Technology, 1987, 14(2): 203-223.

[22]Wilson W R D, Hsui T C, Huang X B. A realistic friction model for computer simulation of sheet metal forming processes[J]. Journal of Manufacturing Science & Engineering, 1995, 117(2): 202-209.

[23]mer Necati Cora, Agˇcayaz A, Namiki K, et al. Die wear in stamping of advanced high strength steels-investigations on the effects of substrate material and hard-coatings[J]. Tribology International, 2012, 52(3): 50-60.

[24]Wang W, Zheng X, Hua M, et al. Influence of surface modification on galling resistance of DC53 tool steel against galvanized advanced high strength steel sheet[J]. Wear, 2016, 360-361:1-13.

[25]Zeng Q, Yu F, Dong G. Mechanism analysis of improved DLC films friction behaviors with liquid sulfidation treatment[J]. Applied Surface Science, 2012, 259(15): 83-92.

[26]Banerji A, Bhowmick S, Alpas A T. High temperature tribological behavior of W containing diamond-like carbon (DLC) coating against titanium alloys[J]. Surface & Coatings Technology, 2014, 241(3): 93-104.

[27]Morita T, Hirano Y, Asakura K, et al. Effects of plasma carburizing and DLC coating on friction-wear characteristics, mechanical properties and fatigue strength of stainless steel[J]. Materials Science & Engineering A, 2012, 558(51): 349-355.

[28]Hu Z M, Dean T A. A study of surface topography, friction and lubricants in metalforming[J]. International Journal of Machine Tools & Manufacture, 2000, 40(11): 1637-1649.

[29]黄敏纯, 高诚辉, 黄录官. 模具粗糙度对板材拉延件摩擦特性的影响[J]. 机械工程学报, 2004, 40(2): 177-180.

Huang M C, Gao C H, Huang L G. Effect of die surface roughness on friction character of plate drawn component[J].Chinese Journal of Mechanical Engineering, 2004, 40 (2): 177-180.

[30]Lee B H, Keum Y T, Wagoner R H. Modeling of the friction caused by lubrication and surface roughness in sheet metal forming[J]. Journal of Materials Processing Technology, 2002, 130-131(2): 60-63.

[31]马晨波, 朱华, 陆斌斌, 等. 引入特征粗糙度参数的Stribeck曲线试验研究[J]. 摩擦学学报, 2010, 30(5): 466-471.

Ma C B, Zhu H, Lu B B, et al. Experimental study on Stribeck curves based on characteristic roughness[J]. Tribology, 2010, 30(5): 466-471.

[32]Podgornik B, Jerina J. Surface topography effect on galling resistance of coated and uncoated tool steel[J]. Surface and Coatings Technology, 2012, 206(11-12): 2792-2800.

[33]林启权, 殷望, 董文正, 等. 镀锌钢板圆筒拉深件表面损伤行为的研究[J].机械科学与技术, 2016, 35(5): 795-799.

Lin Q Q, Yin W, Dong W Z, et al. Investigation of surface damage in cylinder deep drawing of galvanized steels[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(5): 795-799.

[34]李波, 康永林, 朱国明, 等. 研究基板强度对汽车用合金化热镀锌板摩擦因数的影响[J]. 材料工程, 2012, (8): 14-18.

Li B, Kang Y L, Zhu G M, et al. Effects of substrate strength on friction coefficient of galvannealed auto steel sheets[J]. Journal of Materials Engineering, 2012, (8): 14-18.

[35]Wang W, Hua M, Wei X. A comparison study of sliding friction behavior between two high strength DP590 steel sheets against heat treated DC53 punch: Hot-dip galvanized sheet versus cold rolled bare sheet[J]. Tribology International, 2012, 54(1): 114-122.

[36]Wang C, Guo B, Shan D, et al. Effects of interfacial contact states on tribological behaviour in micro-sheet forming[J]. International Journal of Mechanical Sciences, 2015, 101-102: 81-88.

[37]Eriksson J, Olsson M. Tribological testing of commercial CrN, (Ti,Al)N and CrC/C PVD coatings-evaluation of galling and wear characteristics against different high strength steels[J]. Surface & Coatings Technology, 2011, 205(16): 4045-4051.

[38]Garza L G, Van Tyne C J. Friction and formability of galvannealed interstitial free sheet steel[J]. Journal of Materials Processing Technology, 2007, 187-188(12): 164-168.

[39]张启富, 袁训华, 江社明, 等. 热镀锌合金化镀层相结构对摩擦特性与粉化量的影响[J]. 金属热处理, 2012, 37(6): 114-118.

Zhang Q F, Yuan X H, Jiang S M, et al. Effects of phase structure on friction characteristic and powdering amount of galvannealed steel sheet[J].Heat Treatment of Metals, 2012, 37(6): 114-118.

[40]王红美, 徐滨士, 马世宁, 等. 纳米压痕法测试电刷镀镍镀层的硬度和弹性模量[J]. 机械工程学报, 2005, 41(4): 128-131.

Wang H M, Xu B S, Ma S N, et al. Hardness and modulus of elasticity of brush plated nickle coating by nanoindentation testing[J].Chinese Journal of Mechanical Engineering, 2005, 41(4): 128-131.

[41]覃奇贤, 刘淑兰. 镀层与基体的结合力[J]. 电镀与精饰, 2010, 32(1): 34-36.

Qin Q X, Liu S L. Adhesion of coating with substrate[J]. Plating & Finishing, 2010, 32(1): 34-36.

[42]Song G M, Sloof W G. Characterization of the failure behavior of zinc coating on dual phase steel under tensile deformation[J]. Materials Science & Engineering A, 2011, 528(21): 6432-6437.

[43]王银军, 江社明, 张启富. 热镀锌钢板锌层冲压脱落的原因分析[J]. 铸造技术, 2017, (3):589-592.

Wang Y J, Jiang S M, Zhang Q F. Analysis of galvanized plate zinc coating stamping exfoliating [J]. Foundry Technology, 2017, (3): 589-592.

[44]Li G, Liu Y, Du T, et al. Algorithm research and system development on geometrical springback compensation system of advanced high strength steel parts [J]. International Journal of Advanced Manufacturing Technology, 2014, 70(1-4): 413-427.

[45]李贵，柳玉起，柯俊逸，等. 先进高强度钢板DP590回弹试验及数值模拟研究[J]. 锻压技术，2013，38(5): 50-55.

Li G, Liu Y Q, Ke J Y, et al. Experimental research and numerical simulation of springback for advanced high-strength steel-DP590 [J]. Forging & Stamping Technology, 2013, 38(5): 50-55.

[46]李贵，柳玉起，孙世岩，等. 基于UV线的几何旋转变形回弹补偿算法[J]. 华中科技大学学报：自然科学版, 2012, 40(9): 106-109.

Li G, Liu Y Q, Sun S Y, et al. Geometrical rotation morphing springback compensation algorithm based on UV curves [J]. Journal of Huazhong University of Science and Technology: Nature Science, 2012, 40(9): 106-109.

[47]Figueiredo L, Ramalho A, Oliveira M C, et al. Experimental study of friction in sheet metal forming[J]. Wear, 2011, 271(9): 1651-1657.

[48]刘倩, 李建军, 付秀娟, 等. 板料成形过程中成形速度对B340/590DP摩擦性能的影响[J].锻压技术, 2012, 37(5): 27-31.

Liu Q, Li J J, Fu X J, et al. Influence of forming speed on friction property of B340/590DP in sheet metal forming[J]. Forging & Stamping Technology, 2012, 37(5): 27-31.

[49]Wang W, Hua M, Wei X, et al. A comparison study of sliding friction behavior between two high strength DP590 steel sheets against heat treated DC53 punch: Hot-dip galvanized sheet versus cold rolled bare sheet[J]. Tribology International, 2012, 54(1):114-122.

[50]Wang W, Zhao Y, Wang Z, et al. A study on variable friction model in sheet metal forming with advanced high strength steels[J]. Tribology International, 2016, 93: 17-28.

[51]Lee S, Joun M, Kim D, et al. Effect of elastic-plastic behavior of coating layer on drawability and frictional characteristic of galavnnealed steel sheet[J]. Journal of Mechanical Science and Echnology, 2016, 30(7): 3313-3319.

[52]Samuel M. Influence of drawbead geometry on sheet metal forming[J]. Journal of Materials Processing Technology, 2002,122(1): 94-103.

[53]Gong H Y, Lou Z L, Zhang Z L. Studies on the friction and lubrication characteristics in the sheet steel drawing process[J]. Journal of Materials Processing Technology, 2004, 151(1-3): 328-333.

[54]Velkavrh I, Kalin M. Comparison of the effects of the lubricant-molecule chain length and the viscosity on the friction and wear of diamond-like-carbon coatings and steel[J]. Tribology International, 2012, 50(4):57-65.

[55]Wang Z, Tamotsu N, Kuniaki D, et al. FEM analysis of contact mechanism in press-forming of lubricant precoated steel sheet[J]. Journal of Materials Processing Technology, 2003, 140(1-3): 514-519.

[56]Kim H, Ji H S, Sivakumar R, et al. Evaluation of stamping lubricants using the deep drawing test[J]. International Journal of Machine Tools & Manufacture, 2007, 47(14):2120-2132.

[57]Pereira M P, Rolfe B F. Temperature conditions during ′cold′ sheet metal stamping[J]. Journal of Materials Processing Technology, 2014, 214(8):1749-1758.

[58]Liu W, Liu H S, Xing Z W, et al. Effect of tool temperature and punch speed on hot stamping of ultra high strength steel[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(S2): 534-541.

[59]Laptev A, Baufeld B, Swarnakar A K, et al. High temperature thermal expansion and elastic modulus of steels used in mill rolls[J]. Journal of Materials Engineering and Performance, 2012, 21(2):271-279.

[60]Samadian P, Parsa M H, Shakeri A. Determination of proper austenitization temperatures for hot stamping of AISI 4140steel[J]. Journal of Materials Engineering and Performance, 2014, 23(4): 1138-1145.

[61]Yan W. Deformation and frictional heating in relation to wear in sheet metal stamping[J]. Steel Research International, 2010, 81(9): 713-716.