Transactions of Materials and Heat Treatment

Title：Parametric design on hydraulic system for high-speed

Authors： An Jianjun Zhang Xiaoli Xue Fei Wang Shuanqing Bai Shuangbao

Unit： Lanzhou Ls Group Co. Ltd. Engineering Technology Research Center of Large-scale Rapid Forging Hydraulic Equipment Key Laboratory of Metal Plastic Forming Equipment Intelligent Control

KeyWords： high-speed forging hydraulic press hydraulic system combined simulation technology parametric design VB.NET AMESim

ClassificationCode：TG315.4

year,vol(issue):pagenumber：2018,43(11):105-109

Abstract：

Parametric design is one of the trends in the technology development of hydraulic system for high-speed forging press. For the current difficulties in the design of high-speed forging press, such as complex calculation of design parameter, fussy selection of hydraulic system component, difficulty in solving problems in practical application after product forming. Using VB.NET as the development environment, based on AMESim and VB.NET combined simulation technology, the software of hydraulic system for high-speed forging press used for calculation, component selection and system simulation was designed and developed, the hydraulic system parameters of different tonnage high-speed forging presses were calculated quickly and accurately, and the hydraulic component selection and system simulation were conducted. Then, the rationality of parameters and component selection of presses were identified by the analysis of simulation results, and the design parameters,component seledion and simulation curves were exported in the form of report. Finally, the parametric design of hydraulic system for high-speed forging press is realized, which is a favorable tool for hydraulic system designers.

Funds：

安建军（1985-），男，硕士，高级工程师,E-mail：284857529@qq.com;通讯作者：张晓丽（1989-），女，硕士，工程师,E-mail: 799656900@qq.com

Reference：

[1]赵烨. 通用的中小型立式液压泵站的参数化设计研究[D].郑州：郑州大学，2015.

Zhao Y. The Research of Parametric Design for General Medium-sized Vertical Hydraulic Pump Station[D]. Zhengzhou: Zhengzhou University, 2015.

[2]苗燕. 基于SolidWorks的液压缸参数化设计[D]. 沈阳：东北大学，2009.

Miao Y. Parameterization Design of the Hydraulic Cylinder Based on Solidworks[D]. Shenyang: Northeastern University，2009.

[3]张文汉. 液压缸计算机辅助设计系统的开发和研究[D]. 沈阳：东北大学，2008.

Zhang W H. Research Development and Study on Intelligent Computer Aided Design System of the Hydraulic Cylinder[D]. Shenyang: Northeastern University, 2008.

[4]石志国, 刘冀伟, 张维存. VB.NET数据库编程[M]. 北京: 清华大学出版社, 2009.

Shi Z G, Liu J W,Zhang W C. VB.NET Database Program [M]. Beijing: Tsinghua University Press, 2009.

[5]马纪明. AMESim与VB联合仿真在柱塞泵分析中的应用[J]. 机床与液压，2010，38(17)：98-101.

Ma J M. The application of joint simulation based on AMESim and VB in analysis of a piston pump[J]. Machine Tool & Hydraulics，2010，38(17)：98-101.

[6]梁全，苏齐莹. 液压系统AMESim计算机仿真指南[M]. 北京: 机械工业出版社，2014.

Liang Q，Su Q Y. Computer Simulation Guide of Hydraulic System Use AMESim [M]. Beijing: China Machine Press, 2014.

[7]付永领，祁晓野. LMS Imagine.Lab AMESim系统建模和仿真参考手册[M]. 北京: 北京航空航天大学出版社，2011.

Fu Y L，Qi X Y. LMS Imagine.Lab AMESim System Modeling and Simulation Reference Manual[M]. Beijing: Beihang University Press，2011.

[8]Evangelos Petroutsos. Visual Basic.NET从入门到精通[M]. 北京: 电子工业出版社，2002.

Evangelos Petroutsos. Visual Basic.NET from Novice to Professional[M]. Beijing: Publishing House of Electronics Industry，2002.

[9]李文，陈柏金. 锻造液压机生产过程能耗分布规律研究[J]. 液压与气动，2016, (8): 112-116.

Li W，Chen B J. Energy distribution pattern of forging hydraulic press[J]. Chinese Hydraulics & Pneumatics，2016, (8): 112-116.

[10]张友亮, 田丽红, 杨喆. 基于AMESim的快锻压机泄压特性仿真分析[J]. 锻压装备与制造技术, 2015, 50(6):47-49.

Zhang Y L, Tian L H, Yang Z. Simulation analysis of pressure relief characteristics for fast forging press based on AMESim[J]. China Metalforming Equipment & Manufacturing Technology, 2015, 50(6): 47-49.

Service：

【This site has not yet opened Download Service】【Add Favorite】