[1]居大伟,张建. 大口径弯头挤压弯曲成形数值模拟分析 [J]. 机械设计,2010,27(10):82-85.
Ju D W, Zhang J. Numerical simulation and analysis on extrusion and bending process of large diameter elbow [J]. Journal of Mechanical Design, 2010, 27(10): 82-85.
[2]Panthi S K, Ramakrishnan N. Semi analytical modeling of springback in arc bending and effect of forming load [J]. Transactions of Nonferrous Metals Society of China, 2011, 21(10): 2276-2284.
[3]Xue P, Yu T X, Chu E. Theoretical prediction of the springback of metal sheets after a double-curvature forming operation [J]. Journal of Materials Processing Technology, 1999, 89-90(3): 65-71.
[4]Yang X, Choi C, Sever N K, et al. Prediction of springback in air-bending of advanced high strength steel (DP780)considering Young′s modulus variation and with a piecewise hardening function [J]. International Journal of Mechanical Sciences, 2016, 105: 266-272.
[5]段永川,官英平,赵军. 拼焊宽板V形自由弯曲回弹预测及试验验证 [J]. 机械工程学报,2012,48(20):63-69.
Duan Y C, Gan Y P, Zhao J. Prediction and experiment verification of spring-back of tailor welded blanks air bending process [J]. Journal of Mechanical Engineering, 2012, 48(20): 63-69.
[6]张冬娟,崔振山,李玉强,等. 宽板大曲率半径纯弯曲回弹量理论解析 [J]. 工程力学,2006,23(10):77-81.
Zhang D J, Cui Z S, Li Y Q, et al. The springback of wide metal sheet after large radius pure bending [J]. Engineering Mechanics, 2006, 23(10): 77-81.
[7]刘贞伟,郭运. 基于Yoshida_Uemori材料模型的整形工艺超高强钢地板纵梁的回弹分析 [J]. 锻压技术,2018,43(10):62-67.
Liu Z W, Guo Y. Springback analysis on sizing process of longitudinal floor beam for super high strength steel based on Yoshida_Uemori material model [J]. Forging & Stamping Technology, 2018, 43(10): 62-67.
[8]余同希,章亮炽. 塑性弯曲理论及其应用 [M]. 北京:科学出版社,1992.
Yu T X,Zhang L C. The Theory and Application of Plastic Bending [M]. Beijing: Science Press, 1992.
[9]赵长明. 宽厚板压弯回弹预测模型研究 [D]. 河北:燕山大学,2016.
Zhao C M. Study on Prediction Model of Plate Bending Springback [D]. Hebei: Yanshan University, 2016.
[10]薛克敏,孙大智,李萍,等. 22MnB5超高强钢热冲压成型工艺及试验 [J]. 中国机械工程,2017,28(12):1498-1503.
Xue K M, Sun D Z, Li P, et al. Hot stamping forming process and experiments of 22MnB5 ultra-high strength steels [J]. China Mechanical Engineering, 2017, 28(12): 1498-1503.
[11]朱旭霞,彭大暑,黎祚坚. 船体中厚钢板局部热压成形中的回弹仿真分析 [J]. 中国舰船研究,2017,(4):914-918.
Zhu X X, Peng D S, Li Z J. Numerical simulation of springback of medium-thick plates in local hot rolling [J]. Chinese Journal of Ship Research, 2017,(4): 914-918.
[12]姜志琳,赵均海,吕美彤,等.基于线性强化模型的双层厚壁圆筒极限内压统一解 [J].工程力学,2018,35(S1):6-12.
|