|
Abstract：
|
|
A kind of integrated precision forging process of shaped case ring forgings for Waspaloy alloy with inner and outer flanges was introduced. Then, through the surface control technology of microstructure uniformity for difficult-to-deform and low-plasticity materials and the key technologies of the preparation of large shaped ring blank for Waspaloy alloy with inner and outer flanges and the integrated precision rolling of large and complex shaped ring parts for Waspaloy alloy，combined with the full process simulation，the process plan was worked out, and the parameters of forging and heat treatment were determined to produce shaped case ring forgings for Waspaloy alloy with inner and outer flanges successfully. Therefore, the formed special profiles of inner and outer diameters for shaped case ring forgings manufactured by this technology are good, the dimensions meet the usage requirements, the microstructure is uniform, and the performance indexes meet the requirements of SAE AMS 5707—2017. Meanwhile, the precious metal raw material is reduced to input, the cost is decreased, and the uniformity and the overall performance of case are improved.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
吴永安（1970-），男，学士，高工，E-mail：wya@gzhykj.net
|
|
Reference：
|
[1]师昌绪，钟群鹏，李成功，等.中国材料工程大典[M].北京:化学工业出版社，2005.
Shi C X, Zhong Q P, Li C G, et al. China Material Enginnering Dictionary[M]. Beijing: Chemical Industry Press,2005.
[2]中国金属学会高温材料分会编.中国高温合金手册[M]. 北京:中国标准出版社, 2012.
Academic Committee of the Superalloys, CSM. China Superalloys Handbook[M]. Beijing:China Standard Press, 2012.
[3]黄乾尧. 高温合金[M]. 北京:冶金工业出版社, 2000.
Huang Q Y. Superalloys[M]. Beijing: Metallurgical Industry Press, 2000.
[4]罗鸿飞, 刘有云, 宋捷, 等. GH4169合金超大异形环件制造工艺研究[J]. 航空制造技术，2014,（7）：49-52.
Luo H F, Liu Y Y, Song J, et al. Manufacturing technology for large contour ring of GH4169 alloy[J].Aeronautical Manufacturing Technology, 2014,（7）：49-52.
[5]王广春,管婧,赵国群. 锻造成形微观组织优化建模及应用[J]. 塑性工程学报,2012,24(5):49-53.
Wang G C, Guan J, Zhao G Q. Modeling and application of microstructure optimization in forging process [J]. Journal of Plasticity Engineering, 2012, 24(5):49-53.
[6]Semiatin S L, Fagin P N, Glavicic M G, et al. Deformation behavior of Waspaloy at hot-working temperature[J]. Scriptamateria-lia, 2004, 50(5): 625-629.
[7]Chang K M, Liu X. Effect of γ′ content on the mechanical behavior of the Waspaloy alloy system[J]. Materials Science and Engineering A, 2001, 308(1):1-8.
[8]Hombogen E， Zum G, Karl H. Microstructure and fatigue crack growth in a Gamma-Fe EM dash Ni EM dash Al alloy[J]. Acta Metallurgica, 1976, 24(6):581-592.
[9]Roh Rbach K P. Development and selection of superalloys [J]. Aerospace Material Technology, 2005, (1): 61-62.
[10]SAE AMS 5707—2017, Nickel alloy, corrosion and heat-resistant, bars, forgings, and rings 57Ni-19.5Cr-13.5Co-4.3Mo-3.0Ti-1.4Al-0.05Zr-0.006B consumable electrode remelted or vacuum induction melted 1825 to 1900℉（996 to 1038 ℃）solution, stabilization, and precipitation heat treated[S].
[11]Brogdon M L, Rosenberger A H. Evaluation of the Influence of Grain Structure on the Fatigue Variability of Waspaloy[M]. Wiley: Superalloys, 2008.
[12]毛为民. 金属再结晶与晶粒长大[M]. 北京: 冶金工业出版社, 1994.
Mao W M. Metal Recrystallization and Grain Growth[M]. Beijing:Metallurgical Industry Press, 1994.
[13]郭鸿镇. 合金钢与有色金属的锻造 [M]. 西安: 西北工业大学出版社,2009.
Guo H Z. Forging of Alloy Steel and Nonferrous Metals[M]. Xi′an: Northwestern Polytechnical University Press, 2009.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved