|
Abstract：
|
|
Application situation of spinning technology in national defense industry，research status of power spinning technology for high-strength steel and development situation of spinning equipment were researched. The results show that the spinning technology is extensively applied to national defense industry, such as aviation, aerospace and military etc., and the great development is obtained in spinning equipment. However, the power spinning process has the advantages of energy saving, material saving, high efficiency and cleanliness, which is optimum process to produce metal thin-walled parts of revolution. But the standard of power spinning technology is currently far from perfect in China, so it is necessary to formulate the national standard Power spinning of high-strength steel—Technological specification. Furthermore, the technical summary of national standard Power spinning of high-strength steel—Technological specification is introduced, which specifies the general method of power spinning for high-strength steel including process content, process preparation, spinning forming and treatment after spinning. Thus, the research of this standard is helpful to accelerate the popularization of power spinning technology in China and promote the industrial capability.
|
|
Funds：
|
|
国家重点研发计划（2017YFF0207902）
|
|
AuthorIntro：
|
|
史志文（1990-），男，硕士，工程师，E-mail：hjshizhiwen@163.com
|
|
Reference：
|
[1]龙锦川，夏琴香, 肖刚锋，等.旋压技术在国防工业的应用现状及展望[A]. 首届兵器工程大会论文集[C]. 重庆：重庆理工大学期刊社，2017.
Long J C, Xia Q X, Xiao G F, et al. Application status and prospect of spinning technology in national defense industry[A]. Papers Collection of the First Weapon Engineering Congress[C]. Chongqing: Journal Society of Chongqing University of Technology, 2017.
[2]Xia Q X, Xiao G F, Long H, et al. A review of process advancement of novel metal spinning[J]. International Journal of Machine Tools & Manufacture, 2014, 85(7):100-121.
[3]GB/T 8541—2012，锻压术语[S].
GB/T 8541—2012，Terminology of forging stamping[S].
[4]李继贞，刘德贵，王健飞.强力旋压成形技术在航空领域的新进展[J]. 航空制造技术,2018,57(10):40-44.
Li J Z, Liu D G, Wang J F. New progress of power spinning technology in aeronautics [J]. Aeronautical Manufacturing Technology, 2018,57(10):40-44.
[5]Dong J J, Xiao Z H, Zhang X, et al. Research on improving production quality of aero-engine[A].International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering[C]. Sichuan, Emeishan, 2013.
[6]张婷婷,王文先,曹晓卿,等. 强力旋压镁合金筒形件的显微组织及微纳力学性能[J].稀有金属，2019，47(5)：1573-1577.
Zhang T T， Wang W X, Cao X Q，et al.. Microstructure and micro/nano mechanical properties of magnesium alloy tube by power spinning[J].Chinese Journal of Rare Metals，2019，47(5)：1573-1577.
[7]张宇玮，陈永来，杜志惠. 1570 合金可旋性工艺研究[A].第十一届全国旋压技术交流大会论文集[C]. 成都：2008.
Zhang Y W, Chen Y L, Du Z H. Study on rotation technology of 1570 alloy[A]. Papers Collection of the Eleventh National Spinning Technology Exchange Conference[C].Chengdu:2008.
[8]Yang Y. Development of spinning equipment for biconical shaped charge liner[A]. International Conference on Mechatronics and Information Technology[C].China, Shenzhen, 2016.
[9]Abdel-Magied R K. A novel technique with compound tool for multi-stage metal spinning [J]. International Journal of Advanced Manufacturing Technology, 2015, 79(1-4):57-63.
[10]詹梅，杨合，陈飞，等. 一种带横向内筋大型复杂曲母线薄壁构件旋压成形芯模[P].中国： CN102091736A.2011-11-04.
Zhan M, Yang H, Chen F, et al. A spinning forming core die for large complex curved bus thin-walled components with transverse internal reinforcement[P].China：CN102091736A.2011-11-04.
[11]肖志兵，李晓谦，陈国琼，等. T250 钢大直径薄壁圆筒旋压工艺试验研究[J]. 航天制造技术,2006,(4):17-20.
Xiao Z B, Li X Q, Chen G Q, et al. Experimental study on spinning technology of large diameter thin wall cylinder of T250 steel[J]. Aerospace Manufacturing Technology, 2006,(4):17-20.
[12]侯红亮，任学平.超高强钢大型卷焊毛坯圆筒旋压工艺研究[J].锻压装备与制造技术,1999,30(6):30-31.
Hou H L, Ren X P. Research on spinning process of big diameter curling weld billet for ultrahigh strength steel[J]. China Metalforming Equipment & Manufacturing Technology，1999,30(6):30-31.
[13]石磊，肖华，夏琴香. DP600 高强钢多道次拉深旋压成形机理研究[A]. 第十一届中国钢铁年会论文集[C].北京：冶金工业出版社，2017.
Shi L, Xiao H, Xia Q X. Research on forming mechanism of muti-pass drawing spinning of the high strength steel DP600[A].Proceedings of the 11th CSM Steel Congress[C]. Beijing: Metallurgical Industry Press, 2017.
[14]杨毅刚, 张立武, 韩冬.30CrMnSiA 钢薄壁筒错距旋压成形工艺研究[J]. 金属成形工艺,2002,22(2):64-67.
Yang Y G, Zhang L W, Han D. Research on stagger spinning forming process of 30CrMnSiA steel feathered tube[J]. Metal Forming Process, 2002,22(2):64-67.
[15]范赵斌, 韩冬, 段述苍,等. T250 马氏体时效钢旋压薄壁圆筒变形[J].材料科学与工程学报，2011，29（6）:954-958.
Fan Z B,Han D, Duan S C，et al. Deformation of thin wall cylinders of T250 maraging steel during spinning[J]. Journal of Materials Science & Engineering，2011，29（6）：954-958.
[16]JB/T 7532—2005,旋压工艺编制原则[S].
JB/T 7532—2005,Establishing principle of spinning process[S].
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved