［1］庄军生. 桥梁支座
［M］.第4版.北京:中国铁道出版社,2015.

Zhuang J S. Bridge Bearing
［M］. The 4th Edition. Beijing: China Railway Press,2015.

［2］洪慎章. 实用冲压工艺及模具设计
［M］.北京:机械工业出版社,2018.

Hong S Z. Practical Stamping Process and Die Design
［M］.Beijing: China Machine Press,2018.

［3］JB/T 6959—2008, 金属板料拉深工艺设计规范
［S］.

JB/T 6959—2008, The criterion of design of sheet metal drawing process
［S］.

［4］许文文, 梅瑛,何镏源.变薄拉深筒形件尺寸偏差的分析与研究
［J］.锻压技术,2019,44(4):90-94.

Xu W W, Mei Y, He L Y. Analysis and research on dimensional deviation of ironing for cylindrical part
［J］.Forging & Stamping Technology, 2019, 44(4): 90-94.

［5］高恩志, 陈文超,李作成,等.纯钛半球形零件拉深回弹影响因素分析
［J］.锻压技术,2018,43(12):57-61.

Gao E Z, Chen W C, Li Z C，et al. Analysis on drawing springback influencing factors for pure titanium hemispherical part
［J］. Forging & Stamping Technology, 2018,43(12):57-61.

［6］浦胜义. 304不锈钢拉深成形模具设计
［J］.河南科技,2018，(8):43-44.

 Pu S Y. Design of 304 stainless steel drawing die
［J］.Henan Science and Technology,2018，(8):43-44.

［7］李富柱, 翟长盼,李伟,等.汽车车身构件冲压回弹研究现状
［J］.锻压技术,2018,43(2):1-8.

Li F Z, Zhai C P, Li W，et al. Research on status of stamping springback for auto-body parts
［J］. Forging & Stamping Technology, 2018,43(2):1-8.

［8］徐庆, 陈炜,刘义,等.不同厚度304不锈钢薄板微盒形件拉深试验研究
［J］.热加工工艺,2017,46(21):148-151.

Xu Q, Chen W, Liu Y, et al. Experimental investigation on micro-box deep drawing of 304 stainless steel sheet with different thicknesses
［J］. Hot Working Technology, 2017,46(21):148-151.

［9］白颖, 李善良,段嘉庆,等.拉深成形过程中不规则楔形深腔件的缺陷控制
［J］.锻压技术,2019,44(10):49-55.

Bai Y, Li S L, Duan J Q, et al. Defect control of irregular wedge-shaped deep cavity during deep drawing process
［J］. Forging & Stamping Technology, 2019,44(10):49-55.

［10］贾吉林, 张昌明.304不锈钢拉深成形模具设计
［J］.热加工工艺,2012,41(13):209-211，214.

Jia J L, Zhang C M. Design of 304 stainless steel deep drawing die
［J］. Hot Working Technology, 2012, 41(13): 209-211，214.

［11］孙满平. 浅析不锈钢薄板的拉深
［J］.金属加工：冷加工,2008，(10):46.

Sun M P. Analysis of drawing of stainless steel sheet
［J］. Metal Working, 2008，(10):46.

［12］王淑俊, 王双枝,刘莉,等.980QP先进高强钢的冲压成形工艺
［J］.锻压技术,2019,44(4):64-68.

Wang S J, Wang S Z, Liu L, et al. Stamping process of advanced 980QP high strength steel
［J］. Forging & Stamping Technology, 2019,44(4):64-68.

［13］杨钒, 杨瑞霞.几种不锈钢板材冲压成形性能的试验研究
［J］.制造技术与机床,2017，(7):124-127.

Yang F, Yang R X. Experimental study on stamping formability of several kinds of stainless steel plate
［J］. Manufacturing Technology ＆ Machine Tool, 2017，(7): 124-127.

［14］GB/T 3280—2015, 不锈钢冷轧钢板和钢带
［S］.

GB/T 3280—2015, Cold rolled stainless steel plate, sheet and strip
［S］.