|
Based on the assembly structure of twin-roll rotary forging machine with load of 5000 kN, according to the load law of twin-roll rotary forging transmission parts, the working condition of roll shaft for twin-roll rotary forging machine was studied. Through the construction of finite element model for relevant components, the stiffness and strength of roll shaft were analyzed by software Hypermesh, and the structure of roll shaft connection was optimized according to the analysis results. Then, the roll shafts with optimized structure were assembled, and the twin-roll rotary forging after assembly was debugged. Furthermore, through several on-site tests, the results show that the twin-roll rotary forging machine runs stably without bad vibration, the stiffness and strength of roll shaft meet the requirements, and the processed parts also meet the quality requirements. Thus, the rationality, stability and reliability of the roll shaft design were verified. And the research results provide guidance for the development of twin-roll rotary forging machine with higher stiffness and strength and better safety performance.
|
|
[1]胡亚民,姚万贵,冯文成.我国摆动辗压技术现状及展望(一)[J].锻压装备与制造技术,2011,46(1):9-13. Hu Y M, Yao W G, Feng W C. The status and prospect of orbital forming process in China [J]. China Metalforming Equipment & Manufacturing Technology, 2011,46 (1): 9-13. [2]胡亚民,姚万贵,冯文成.我国摆动辗压技术现状及展望(二)[J].锻压装备与制造技术,2011,46(2):11-16. Hu Y M, Yao W G, Feng W C. The status and prospect of orbital forming process in China [J]. China Metalforming Equipment & Manufacturing Technology, 2011,46 (2): 11-16. [3]郑甲红,路平.2 MW风力发电机关键零部件有限元分析[J].机械设计与制造,2013,(9):129-130,133. Zheng J H, Lu P. The key parts of 2 MW wind power generator finite element analysis [J]. Mechanical Design & Manufacturing, 2013, (9): 129-130,133. [4]滕庆明.双螺杆挤出机传动系统的方案比较和强度分析[D].北京：北京化工大学,2008. Teng Q M. Scheme Comparison and Strength Analysis of Drive System Twin Screw Extruder[D]. Beijing: Beijing University of Chemical Technology, 2008. [5]张韶华, 张猛. 锥辊辗压机[P].中国: CN2412679, 2001-01-03. Zhang S H, Zhang M. Press with cone-shaped roll [P]. China: CN2412679, 2001-01-03. [6]张猛, 张韶华, 徐伟. 双锥辊轴向轧机及轴向轧制技术[J]. 现代制造工程, 2004,(9): 59-60. Zhang M, Zhang S H, Xu W. Twin cone roll axial mill & axial rolling technology [J]. Modern Manufacturing Engineering, 2004, (9): 59-60. [7]张韶华,徐伟,张猛.双锥辊轴向轧机轧制原理及轧制力能参数计算[J].塑性工程学报,2005, 12(3):18-21. Zhang S H, Xu W, Zhang M. Rolling principle of twin cone rollers axle-mill & calculating force and energy during axial rolling [J]. Journal of Plastic Engineering, 2005, 12(3): 18-21. [8]朱春东,华林.双辊摆辗机[P]. 中国: CN101823110A, 2010-09-08. Zhu C D, Hua L. Twin rollers rotary forging machine [P]. China: CN101823110A, 2010-09-08. [9]李世宽,张有明,冯克敏,等.一种金属轴向辊碾成形机及其辊碾成型工艺[P]. 中国: CN103611860A, 2014-03-05. Li S K, Zhang Y M, Feng K M, et al. A metal axial roll forming machine and its roll forming process [P]. China: CN103611860A, 2014-03-05. [10]Kawai Kenichi, Hayama Masujiro, Su H X. Rotary heading using a rotary-forging machine with a side roller[J]. Elsevier, 1993, 37(1-4):115-123. [11]Zhu C D, Jiang X, Dai T L. Research on technology of twin rollers rotary forging of spiral bevel gears[J]. Ironmaking & Steelmaking, 2015, 42(8):632-640. [12]成大先.机械设计手册 [M]. 第5版. 北京: 化学工业出版社, 2010. Cheng D X. Mechanical Design Manual [M]. The Fifth Edition. Beijing: Chemical Industry Press, 2010. [13]张易. 5000 kN双辊摆辗机传动件及机身的结构研究[D]. 武汉：武汉理工大学,2018. Zhang Y. Structural Research on Transmission Parts and Fuselage of 5000 kN Twin Rollers Rotary Forging Machine[D]. Wuhan: Wuhan University of Technology, 2018.
|
Copyright Forging & Stamping Technology.All rights reserved