Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Arch effect for salix granules dense forming under different breakage degrees
Authors: Li Zhen  Sha Qianyi  Li Jinda  Guo Xinyu 
Unit: Inner Mongolia University of Science and Technology 
KeyWords: salix granules  arch effect  breakage  uniaxial compression  force chain 
ClassificationCode:TK6
year,vol(issue):pagenumber:2023,48(2):111-117
Abstract:

During the forming process of biomass, most granules are in a high stress state, resulting in partial breakage of granules. Granule breakage changes the grading characteristics of the overall granule and has a significant influence on its macro and micro mechanical properties. In order to optimize the biomass forming process, it is necessary to establish a link between micro and macro. Therefore, a uniaxial compression model was constructed by software PFC3D, and the forming processes of biomass under different breakage degrees were studied, the influence laws of force chain formation and arch effect on the process were explored, and the stress-strain curve, kinetic energy change and force chain network during the forming process were analyzed to verify that the increasing of granule breakage degree increases the number of force chains in the axial direction, and the greater the breakage degree is, the more damage the arch structure is. Thus, it is clear that the granule breakage has a certain impact on the force chain network and the evolution of arch structure.

Funds:
内蒙古自治区自然科学基金资助项目(2020LH05020);国家自然科学基金资助项目(51666016)
AuthorIntro:
作者简介:李震(1973-),男,博士,教授,E-mail:lizhen_730106@126.com;通信作者:沙潜毅(1997-),男,硕士研究生,E-mail:1104598447@qq.com
Reference:

 [1]霍丽丽, 赵立欣,田宜水,等. 生物质颗粒燃料成型的黏弹性本构模型[J].农业工程学报,201329(9): 200-206.


Huo L L,Zhao L X,Tian Y S,et al.Viscoelastic constitutive model of biomass pellet[J].Transactions of the Chinese Society of Agricultural Engineering,201329(9): 200-206.


[2]刘汉龙, 孙逸飞,杨贵,等. 粗粒料颗粒破碎特性研究评述[J].河海大学学报:自然科学版,201240(4)361-369.


Liu H L,Sun Y F,Yang G,et al.A review of particle breakage characteristics of coarse aggregates[J].Journal of Hohai University:Natural Sciences,2012404):361-369.


[3]徐琨, 周伟,马刚,等. 基于离散元法的颗粒破碎模拟研究进展[J]. 岩土工程学报,2018405):880-889.


Xu K,Zhou W,Ma G,et al.Review of particle breakage simulation based on DEM[J].Chinese Journal of Geotechnical Engineering,2018,40(5)880-889.


[4]刘君, 刘福海,孔宪京.考虑破碎的堆石料颗粒流数值模拟[J].岩土力学,2008,29(S1):107-112.


Liu J,Liu F H,Kong X J,Particle flow code numerical simulation of particle breakage of rockfill [J].Rock and Soil Mechanics,2008,29(S1):107-112.


[5]Potyondy D O, Cundall P A. A bonded-particle model for rock[J]. International Journal of Rock Mechanics & Mining Sciences, 2004, 41(8): 1329-1364.


[6]Matteo O C,Marcos A,Francesco C,et al.An approach to enhance efficiency of DEM modeling of soils with crushable grains[J]. Geotechnique,2015,65(2):91-110.


[7]Cleary P W. Charge behavior and power consumption in ball mills: Sensitivity to mill operating conditions, liner geometry and charge composition [J]. International Journal of Mineral Processing,2001, 63(2): 79-114.


[8]Cleary P W. Recent advances in DEM modeling of tumbling mills[J]. Minerals Engineering, 2001,14(10): 1295-1319.


[9]De B JMcdowell G.Particle breakage criteria in discrete element modeling [J].Geotechnique,201666(12):1014-1027.


[10]徐佳俊, 陈宇龙,曾成华,.加筋粗粒土直剪力学行为与颗粒破碎特性[J].有色金属:矿山部分,2017,69(4):52-56,103.


Xu J J, Chen Y L, Zeng C H, et al.Mechanical behaviors and particle breakage features of reinforced coarse-grained soil in direct shear test[J].Nonferrous Metals:Mining Section,2017,69(4):52-56,103.


[11]田泽野. 考虑颗粒破碎的粗粒土强度特性研究[D].北京:北京交通大学,2014.


Tian Z Y.Study on Strength Characteristics of Coarse-grained Soils Considering Granular Crushing[D]. Beijing:Beijing Jiaotong University,2014.


[12]杨梅晓. 粗粒土颗粒破碎特性的离散元数值研究[D].大连:大连理工大学,2020.


Yan X M. Numerical Study on Particle Crushing of Coarse-grained Soil Based on Discrete Element Method[D]. DalianDalian University of Technology,2020.


[13]周梦佳, 温彦锋,邓刚,等.堆石料单颗粒劈裂试验破碎强度随机性与尺寸效应的三维离散元模拟[J].岩土力学,2019, 40(S1): 503-510.


Zhou M J, Wen Y F, Deng G,et al.Three-dimensional discrete element simulation of random breaking strength and size effect in single particle splitting test of rockfill [J].Rock and Soil Mechanics,2019, 40(S1): 503-510.


[14]杨贵, 许建宝,刘昆林.粗粒料颗粒破碎数值模拟研究[J].岩土力学,2015, 36(11): 3301-3306.


Yang G, Xu J B, Liu K L. Particle breakage characteristics of coarse aggregates [J].Rock and Soil Mechanics,2015, 36(11): 3301-3306.


[15]Liu Y M, Liu H B, Mao H J. DEM investigation of the effect of intermediate principle stress on particle breakage of granular materials[J]. Computers and Geotechnics, 2017, 84(8): 58-67.


[16]李震, 高雨航,刘彭,.沙柳细枝颗粒致密成型过程中力链演变的离散元研究[J].太阳能学报,2019,40(11):3186-3195.


Li ZGao Y HLiu Pet al.Discrete element study on evolution of force-chain during salix grains dense molding[J].Acta Energiae Solaris Sinica,2019,40(11):3186-3195.

Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com