Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.

Title:Mathematical modeling and experimental study on roll bending of wind turbine towers
Authors:  
Unit:  
KeyWords:  
ClassificationCode:G386.3
year,vol(issue):pagenumber:2024,49(7):122-132
Abstract:

 For the roll bending characteristics of thicker plate and larger forming radius for thick plate components such as offshore wind turbine towers, a simplified model for roll bending process and a modified model considering the offset of bending neutral layer were established, and the roll bending process experiments were conducted. The research results show that the offset of bending neutral layer during the forming process leads to significant differences in the analysis results of contact angles and reduction amounts obtained by the simplified model and the modified model. The increase in the center distance between lower rollers leads to an increase in the contact angle and the reduction amount required to achieve the target radius, while the downward force decreases. Due to the influence of springback, the thicker plates with the same bending curvature require a greater reduction amount to form. With the increasing of plate thickness and reduction amount, the calculation results of the modified model considering the offset of bending neutral layer are in good agreement with the experimental reduction amount.

Funds:
国家自然科学基金资助项目(51975329)
AuthorIntro:
作者简介:刘继坤(1999-),男,硕士研究生 E-mail:lank0110@163.com 通信作者:管延锦(1969-),男,博士,教授 E-mail:guan_yanjin@sdu.edu.cn
Reference:

 
[1]莫施宁.弯卷机和矫正机
[M]. 北京: 机械工业出版社, 1958. 


Morshine. Bending and Straightening Machines
[M]. Beijing: Mechanical Industry Press, 1958.


[2]Hua M, Cole I M, Baines K, et al. A formulation for determining the single-pass mechanics of the continuous four-roll thin plate bending process
[J]. Journal of Materials Processing Technology, 1997, 67(1): 189-194.


[3]Hua M, Baines K, Cole I M. Bending mechanisms, experimental techniques and preliminary tests for the continuous four-roll plate bending process
[J]. Journal of Materials Processing Technology, 1995, 48(1): 159-172.


[4]Hua M, Baines K, Cole I M. Continuous four-roll plate bending: A production process for the manufacture of single seamed tubes of large and medium diameters
[J]. International Journal of Machine Tools and Manufacture, 1999, 39(6): 905-935.


[5]Hua M, Lin Y H. Effect of strain hardening on the continuous four-roll plate edge bending process
[J]. Journal of Materials Processing Technology, 1999, 89-90: 12-18.


[6]Hua M, Sansome D H, Baines K. Mathematical modeling of the internal bending moment at the top roll contact in multi-pass four-roll thin-plate bending
[J]. Journal of Materials Processing Technology, 1995, 52(2): 425-459.


[7]仉志强. 特厚板弯曲成形理论与三辊弯卷成形工艺研究
[D]. 太原: 太原科技大学, 2014.

Zhang Z Q. Research on the Bending Theory and Three-roller Bend-rolling Process of Super-thick Plate
[D]. Taiyuan: Taiyuan University of Science and Technology, 2014.


[8]Hill R. The Mathematical Theory of Plasticity
[M]. New York: Oxford University Press Oxford, 1950.


[9]Baird J C, Li B, Yazdan Parast S, et al. Localized twin bands in sheet bending of a magnesium alloy
[J]. Scripta Materialia, 2012, 67(5): 471-474.


[10]王艳霞. 晶粒大小对AZ31镁合金板材弯曲中性层的偏移和回弹的影响
[D]. 重庆: 重庆大学, 2015.

Wang Y X. Effects of Grain Size on the Shift of Neutral Layer and Springback of AZ31 Magnesium Alloy Sheet
[D]. Chongqing: Chongqing University, 2015.


[11]Gui H, Xing T, Li Y, et al. The influence of neutral layer offset on the straightening force in the process of bimetal composite plate straightening
[J]. Materials Research Express, 2019, 6(8): 086569.


[12]Wang A, Xue H, Saud S, et al. Improvement of springback prediction accuracy for Z-section profiles in four-roll bending process considering neutral layer shift
[J]. Journal of Manufacturing Processes, 2019, 48: 218-227.


[13]Timoshenko S P. LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic bars
[J]. Philosophical Magazine Edinburgh, 1921, 41:744-746.


[14]Futhazar G, Parnell W J, Norris A N. Active cloaking of flexural waves in thin plates
[J]. Journal of Sound and Vibration, 2015, 356: 1-19.


[15]杨杰. 材料力学中载荷集度、剪力、弯矩之间的关系
[J]. 承德民族职业技术学院学报, 2000(2): 19-20.

Yang J. Relationship between load set, shear force and bending moment
[J]. Journal of Chengde National Vocational and Technical College, 2000(2): 19-20.


[16]Hua M, Lin Y H. Large deflection analysis of elastoplastic plate in steady continuous four-roll bending process
[J]. International Journal of Mechanical Sciences, 1999, 41(12): 1461-1483.
Service:
This site has not yet opened Download Service】【Add Favorite
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com