锻压技术

Vague 集在C15 不锈钢变薄拉深工艺参数优化中的应用

英文标题：Application of Vague set in ironing process parameter optimization of C15 stainless steel

作者：张辰锐李　辉

单位：吕梁学院

分类号：TG376

出版年,卷(期):页码：2023,48(1):115-120

摘要：

在Simufat. forming 软件中进行C15 不锈钢变薄拉深成形过程有限元仿真模拟, 以变薄率、凹模锥角和拉深速度为工艺参数变量, 设计3 因素3 水平L9(33) 正交试验, 以工件变薄拉深过程中的拉深力、残余应力与壁厚回弹量为成形质量评价指标, 采用变异系数法对3 个评价指标进行客观权重分配, 引入Vague 集对正交试验结果进行多目标优化, 得到最优工艺参数组合以及各工艺参数对综合评价指标的影响顺序。结果表明: 变薄率为42%、凹模锥角为9°、拉深速度为10 mm·s-1 时,C15 不锈钢变薄拉深工件的成形质量较高。各工艺因素对变薄拉深件的综合成形质量的影响顺序为: 拉深速度>变薄率>凹模锥角。对仿真结果进行试验验证, 仿真和试验结果的最大相对误差(壁厚回弹量) 不大于7. 61%, 仿真结果具有良好的可靠性, 可对实际生产提供理论指导。

Finite element simulation of ironing process for C15 stainless steel was carried out in Simufat. forming software. Taking ironing rate, concave mold cone angle and ironing speed as the process parameter variables, L9(33) orthogonal experiment with three factors and three levels was designed. Taking ironing force, residual stress and wall thickness springback amount as the evaluation indexes of forming quality, the variation coefficient method was adopted to objective weight distribution of three evaluation indexes. The Vague set was introduced to the orthogonal test results for multi-objective optimization, the optimal combination of process parameters and the influence order of each process parameter on the comprehensive evaluation index were obtained. The results show that when the ironing rate is 42%, the concave mold cone angle is 9° and the ironing speed is 10 mm·s-1, the forming quality of C15 stainless steel ironing workpiece is higher. The influence order of process factors on comprehensive forming quality for ironing parts is as follows: ironing speed > ironing rate >concave mold cone angle. The maximum relative error (wall thickness springback amount) of the simulation and test results is not more than 7. 61%. The simulation results have good reliability, which can provide theoretical guidance for practical production.

基金项目：

国家自然科学基金优秀青年科学基金资助项目(51422404); 山西省高等学校科技创新项目(2020L0683); 山西省高等学校教学改革创新项目(J20221165); 吕梁市重点研发项目(2021GXYF-2-60)

作者简介: 张辰锐(1988-), 男, 博士, 讲师 E-mail: zhangchenrui@ llu. edu. cn 通信作者: 李　辉(1985-), 男, 博士, 副教授 E-mail: 453943175@ qq. com

参考文献：

[1] 　南海, 端木樊杰, 李静媛, 等. 变薄拉深对430 不锈钢表面起皱的影响[J]. 钢铁, 2019, 54 (1): 56-62.

Nan H, Duanmu F J, Li J Y, et al. Effect of thinning drawing on surface ridging of 430 stainless steel [J]. Iron and Steel, 2019, 54 (1): 56-62.

[2] 　杨利, 高大伟, 王丹冰, 等. 薄壁深孔筒形件变薄拉深工艺设计[J]. 模具技术, 2015, 5: 46-49.

Yang L, Gao D W, Wang D B, et al. Ironing process for the deep cylindrical and thin-wall part [J]. Die and Mould Technology, 2015, 5: 46-49.

[3] 　肖善超. 弹壳多模一次连续变薄拉深工艺研究[D]. 秦皇岛:燕山大学, 2012.

Xiao S C. Research on Multi-mode-one-off Ironing Process for Cartridge Cas [D]. Qinhuangdao: Yanshan University, 2012.

[4] 　邵振江, 胡鹏飞, 张建萤, 等. 局部变薄拉深冲压件成形工艺研究[J]. 机械设计, 2018, 35 (1): 320-321.

Shao Z J, Hu P F, Zhang J Y, et al. Forming process research on locally thinned drawing stamping parts [J]. Journal of Machine Design, 2018, 35 (1): 320-321.

[5] 　李妍妍, 白凤梅, 宋孟, 等. 基于ABAQUS 的模具参数对深筒件多步拉深过程的影响研究[J]. 热加工工艺, 2022, 51(13): 86-89.

Li Y Y, Bai F M, Song M, et al. Study on effect of die parameters on multi-step drawing process of cylinder parts based on ABAQUS[J]. Hot Working Technology, 2022, 51 (13): 86-89.

[6] 　杜冰, 汤胜强, 黄秀东, 等. 高盒形件多道次变薄拉深工艺机理研究及数值模拟模型确立[J/ OL]. 机械工程学报: 1-15 [2022-11-30]. http: / / kns. cnki. net/ kcms/ detail/11. 2187.

TH. 20220919. 1706. 024. html.

Du B, Tang S Q, Huang X D, et al. Research on the mechanism of multi-pass ironing drawing process of high box-shaped parts and establishment of numerical simulation model [J/ OL]. Journal of Mechanical Engineering: 1 - 15 [ 2022-11-30 ]. http: / /kns. cnki. net/ kcms/ detail/11.2187. TH.20220919.1706.024. html.

[7] 　王瑞, 石明全, 肖建军, 等. 基于正交实验的铝瓶盖冲压成型参数优化[J]. 机械设计与制造, 2016, 9: 210-213.

Wang R, Shi M Q, Xiao J J. Optimization for stamping process parameters of aluminum bottle cap based on orthogonal experiments [J]. Machinery Design & Manufacture, 2016, 9: 210-

213.

[8] 　张跃, 陆广华, 蒋勇, 等. 阶梯盒件拉深成形有限元分析与正交优化[J]. 热加工工艺, 2015, 44 (9): 158-161.

Zhang Y, Lu G H, Jiang Y, et al. Finite element analysis and orthogonal optimization of ladder box pieces deep drawing forming[J]. Hot Working Technology, 2015, 44 ( 9): 158 -

161.

[9] 　王俊彪, 贾建军. 多道次变薄拉深的模拟与优化设计[J]. 西北工业大学学报, 1997, 3 (15): 348-354.

Wang J B, Jia J J. The simulation and optimization multi-step ironing process [J]. Journal of Northwestern Polytechnic University,1997, 3 (15): 348-354.

[10] 薛茂远, 梅益, 罗宁康, 等. 基于模糊集的车用升降器开关面板注射成型保压曲线优化研究[J]. 中国塑料, 2021, 35(10): 76-82.

Xue M Y, Mei Y, Luo N K, et al. Optimization of pressure-holding curve for injection molding of automotive lifter switch panel oriented to Vague set [J]. China Plastics, 2021, 35 (10): 76-

82. 　　　

[11] 崔春生, 曹艳丽, 邱闯闯, 等. 基于证据理论和Vague 集的多属性群决策方法研究[J]. 运筹与管理, 2021, 30 (11):1-5.

Cui C S, Cao Y L, Qiu C C, et al. Research on multi-attribute group decision-making method based on evidence theory and Vague sets [J]. Operations Research and Management Science, 2021, 30 (11): 1-5.

[12] 王鸿绪. 单值数据转化为Vague 值数据的定义和转化公式[J]. 计算机工程与应用, 2010, 46 (24): 42-44.

Wang H X. Definition and transforming formulas from single valued data to Vague valued data [J]. Computer Engineering and Applications, 2010, 46 (24): 42-44.

[13] 舒服华. Vague 集在ZL201 消失模铸造工艺参数优化中的应用[J]. 铸造, 2017, 66 (2): 161-164.

Shu F H. Optimization of process parameters for ZL2O1 lost foam casting based on Vague set [J]. Foundry, 2017, 66 (2): 161-164.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】