锻压技术

基于HyperXtrude的大型空心铝型材挤压模具优化

英文标题：Optimization on extrusion mold for large hollow aluminum profile based on HyperXtrude

分类号：TG76

出版年,卷(期):页码：2023,48(8):194-201

摘要：

挤压模具在铝型材生产中起着关键的作用，合理的模具设计对于挤压出高质量的铝型材至关重要。以分流组合模挤压大型空心铝型材为研究对象，分析了型材的工艺特点，建立了挤压模具的三维模型，采用基于任意拉格朗日-欧拉 (Arbitrary Largrange-Euler，ALE)算法的HyperXtrude软件对铝型材挤压过程进行了数值模拟。针对初始模具模拟出现的金属流速严重不均的问题，设计了两次优化（阻流块结构修改和高度的调整）对铝型材挤压模具进行了修正。结果表明,优化后的挤压模具挤出了流速均匀且基本无变形的铝合金型材，有效地解决了因初始模具设计不合理而导致的金属流速不均的问题。

Extrusion molds play a key role in the production of aluminum profiles, and reasonable mold design is essential for extruding high-quality aluminum profiles. Therefore, for the large hollow aluminum profiles extruded by split-flow combined mold, the process characteristics of the profiles were analyzed, and the 3D model of the extrusion mold was established. Then, the extrusion process of aluminum profiles was numerically simulated by using software HyperXtrude based on Arbitrary Lagrange-Euler (ALE) algorithm, and aiming at the problem of serious uneven metal flow velocity in the initial mold simulation, two times of optimization (the modification of choke block structure and the adjustment of height) were designed to correct the extrusion mold for aluminum profile. The results show that the optimized extrusion mold extrudes the aluminum alloy profiles with uniform flow velocity and basically no deformation, which effectively solves the problem of uneven metal flow velocity caused by unreasonable initial mold design.

基金项目：

甘肃省自然科学基金资助项目（1606RJZA013,20JR10RA266）

作者简介：王鸿鼎（1983-），男，博士，副教授,E-mail：wanghd@lzjtu.edu.cn

参考文献：

[1]韩冰源,高祥涵,杜文博,等.铝合金基材表面耐磨性能强化研究现状[J].材料导报,2023,(10):157-164.

Han B Y, Gao X H, Du W B, et al. Technological advances in strengthening the surface wear resistance of aluminum alloys substrate [J]. Materials Reports,2023,(10):157-164.

[2]李海,徐海峰,王芝秀.预处理对冷轧时效6156铝合金组织与性能的影响[J].稀有金属,2022,46(1):17-26.

Li H，Xu H F，Wang Z X. Microstructures and tensile properties of cold-rolled and re-aged 6156 Al alloy by pre-treating[J]. Chinese Journal of Rare Metals,2022,46(1):17-26.

[3]卢有世,于明涛.异形铝型材挤压模具优化设计[J].锻压装备与制造技术,2009,44(2):87-89.

Lu Y S, Yu M T. Optimization design of extrusion die for special aluminum[J]. China Metal Forming Equipment & Manufacturing Technology,2009,44(2):87-89.

[4]黄春华.模具结构对复杂断面铝合金型材挤压变形的影响[J].热加工工艺,2014,43(11):142-144.

Huang C H. Influence of die-structure on extrusion deformation of aluminum alloy profiles with complex section [J]. Hot Working Technology,2014,43(11):142-144.

[5]陈泽中,娄臻亮,阮雪榆,等.复杂铝型材挤压成形有限体积仿真[J].上海交通大学学报,2005,39(1):27-31,40.

Chen Z Z, Lou Z L, Ruan X Y, et al. Finite volume simulation of extrusion of complex aluminum profile [J]. Journal of Shanghai Jiao Tong University,2005,39(1):27-31,40.

[6]郑庆,徐万和.基于HyperXtrude的铝型材稳态模拟[J].机械制造与自动化,2012,41(2):124-126.

Zheng Q, Xu W H. Steadystate simulation of aluminium profiles based on HyperXtrude [J]. Machine Building & Automation, 2012, 41(2): 124-126.

[7]宋佳胜.散热铝型材挤压模具设计及数值模拟[D].长沙：中南大学,2013.

Song J S. Extrusion Die Design for Heat-dissipation Aluminum Profile and Numerical Simulation [D].Changsha： Central South University,2013.

[8]闫丽. 铝型材挤压过程数值模拟及模具优化设计[D].沈阳：沈阳工业大学,2007.

Yan L. Numerical Simulation for Aluminum Tube Extrusion Process and Optimum Design of Die[D]. Shenyang:Shenyang University of Technology,2007.

[9]Wu X H, Zhao G Q, Luan Y G, et al. Numerical simulation and die structure optimization of an aluminum rectangular hollow pipe extrusion process[J]. Materials Science and Engineering：A, 2006, 435-436:266-274.

[10]孙朝华. 铝型材挤压过程数值模拟及模具优化设计[D].太原：太原理工大学,2004.

Sun Z H. Process Simulation and Optimization Design of Porthole Die for Aluminum Profile Extrusion [D]. Taiyuan:Taiyuan University of Technology,2004.

[11]倪正顺,刘石柏,田胜利,等.铝型材挤压成型数值模拟与模具优化设计[J].铸造技术,2012,33(5):596-599.

Ni Z S, Liu S B, Tian S L, et al. Numerical simulation on aluminum profile extrusion process and optimization design of die [J]. Foundry Technology,2012,33(5):596-599.

[12]陈浩,赵国群,张存生,等.薄壁空心铝型材挤压过程数值模拟及模具优化[J].机械工程学报,2010,46(24):34-39.

Chen H, Zhao G Q, Zhang C S, et al. Numerical simulation of extrusion process and die structure optimization for a hollow aluminum profile with thin wall [J]. Journal of Mechanical Engineering,2010,46(24):34-39.

[13]Hua T R, Yao Y, Li H R, et al. Study on the numerical simulation application in the design and optimization of aluminum extrusion forming mold[J].Machine Tool & Hydraulics, 2016,44(12):88-95.

[14]张德军,林春梅,孙巧妍,等.基于HyperXtrude的大宽厚比工业铝型材挤压速度优化[J].锻压技术,2021,46(10):156-160.

Zhang D J, Lin C M, Sun Q Y, et al. Extrusion speed optimization on industrial aluminum profiles with large width to thickness ratio based on HyperXtrude [J]. Forging & Stamping Technology, 2021,46(10):156-160.

[15]刘国勇,郝鹏鹏,万里.基于HyperXtrude的挤压工艺参数对模具力学行为的影响[J].锻压技术,2022,47(11):179-186.

Liu G Y, Hao P P, Wan L. Influence of extrusion process parameters on mechanical behavior of die based on HyperXtrude [J]. Forging & Stamping Technology,2022,47(11):179-186.

[16]徐磊,赵国群,张存生,等.多腔壁板铝型材挤压过程数值模拟及模具优化[J].机械工程学报,2011,47(22):61-68.

Xu L, Zhao G Q, Zhang C S, et al. Numerical simulation of extrusion process and die optimization for aluminum multi-cavity profile [J]. Journal of Mechanical Engineering,2011,47(22):61-68.

[17]闫洪,柳和生,刘家生.型材挤压模工作带长度设计计算的数学建模[J].塑性工程学报,2002，9(3):70-73.

Yan H, Liu H S, Liu J S. Mathematical model of design and calculation of aluminum profile extrusion die land length [J]. Journal of Plasticity Engineering,2002，9(3):70-73.

服务与反馈：

【文章下载】【加入收藏】