Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Servo forming technology and its several developing trends   2022 ,47(1):1-16
· Research status and prospect on spinning for welded joint of the same/…   2022 ,47(1):17-23
· Influence of forging method on preparation of TC4 titanium alloy small…   2022 ,47(1):24-29
· Coarse grain problem in isothermal forming forgings for 2618 aluminum …   2022 ,47(1):30-35
· Optimization on structural process parameters in clinching for steel-a…   2022 ,47(1):36-42
· Rolling force prediction of hot strip rolling based on GA-PELM   2022 ,47(1):43-48
· Analysis on stamping deformation behavior for U-shaped beam with long…   2022 ,47(1):49-55
· Numerical simulation and optimization on three-roll bending based on t…   2022 ,47(1):56-62
· Two-dimensional blanking algorithm reducing the number of strips for …   2022 ,47(1):63-68
· Process transformation from drawing to blanking combining with posit…   2022 ,47(1):69-74
· Integral SPF/DB forming process and its optimization for TC4 titanium …   2022 ,47(1):75-80
· Hydroforming process of fork tube parts   2022 ,47(1):81-90
· Influence of polyurethane rubber hardness on internal high pressure fo…   2022 ,47(1):91-97
· Sensitivity study on surface roughness processing parameters for wind…   2022 ,47(1):98-105
· Experimental study on electromagnetic forming for 2B06 aluminum alloy   2022 ,47(1):106-114
· Process improvement on eliminating spinning cracks for a certain engin…   2022 ,47(1):115-118
· Control on section distortion for U-shaped 7A09 aluminum profiles in s…   2022 ,47(1):119-123
· Influence of rolling deformation on fragmentation of S phase in Al-Zn-…   2022 ,47(1):124-131
· Assembling and disassembling mechanism on piercing plug based on tand…   2022 ,47(1):132-139
· Time sequence design and optimization on automatic production line for…   2022 ,47(1):140-145
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com