Transactions of Materials and Heat Treatment

The journal resolutely resists all academic misconduct, once found, the paper will be withdrawn immediately.

Location：Home >> Search

Search：

Title	Authors_en	year,vol(issue):pagenumber
· Differential speed rolling technology and its application in magnesium…	ZHANG Wen-yu1,LIU Xian-lan1,2 (1.Department of Mechanical Engineering,Hunan Institute of Technology,Hengyang 421002,China;2.School of Material Science and Engineering,Central South University,Changsha 410083,China)	2008 ,33(2):1-5
· Effect of forging process on crack of shell flange-rear head end	CHEN Sun-yi (Sinopec Maoming Petrochemical Machinery Plant,Maoming 525024 China)	2008 ,33(2):6-9
· Roll forging process analysis of automobile front axle	LANG Rong-xing1,WANG Ting1,HOU De-zheng2 (1.Die and Mould Technology Department,Changzhou Institute of Mechatronic Technology,Changzhou 213164,China;2.Mechanical Engineering Department,Zhangjiajie Institute of Aeronautical Technology,Zhangjiajie 427000,Ch	2008 ,33(2):9-14
·		2008 ,33(2):14-14
· Grain size and microstructure change of GH4133A during multiple heatin…	YUE Tai-wen,YAO Ze-kun,WU Ze,NING Yong-quan,GUO Hong-zhen,GUO Yan-li (School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China)	2008 ,33(2):15-18
· 3D FEM simulation of isothermal forging process for TC11 titanium allo…	SHI Ke,SHAN De-bin,LV Yan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China)	2008 ,33(2):19-22
· Study on drawing fracture in round corner of side-frame auto panel and…	DIAO Ke-shan1,CHEN Xin-ping1,JIANG Hao-min1,CHEN Qing-xin1,SHI Lin2 (1.Institute,Baoshan Iron Steel Co.,Ltd.,Shanghai 201900,China;2.Dongfeng Nissan Passenger Vehicle Company,Guangzhou 510800,China)	2008 ,33(2):23-26
· Simulation and formability analysis of drawing process for car B-pilla…	XING Zhong-wen1,FANG Hua-song1,XU Wei-li2 (1.School of Mechanical and Electrical Engineering,Harbin Institute of Technology,Harbin 150001,China;2.Baosteel Research Institute,Shanghai Baosteel Group Corporation,Shanghai 201900,China)	2008 ,33(2):27-30
· Experimental research on the effect of die hardness on the galling in …	CHEN Xin-ping1,HOU ying-ke2,JIANG Hao-min1,SUN Fang-zhong1,BAO Ping1 (1.Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900;2.School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240)	2008 ,33(2):31-33
· Fast prediction of weld line movement for tailor-welded blank forming	TANG Bing-tao1,WANG Zhao-qing1,ZHANG Yu2 (1.Institute of Engineering Mechanics,Shandong Jianzhu University,Jinan 250101,China;2.Quality Assurance Department,Shanghai Sekely Automobile Modeling Technology Co.,Ltd.,Shanghai 201209,China)	2008 ,33(2):34-37
· Research on blank holder condition of FCF process for stepped-hole of …	LI Hu-feng1,LU Xian-feng1,ZHANG Yue-rong2 (1.School of Mechanical & Electronical Engineering,Nanchang University,Nanchang 330031,China;2.Mechnical Science Research Institution of Jiangxi Province,Nanchang 330002,China)	2008 ,33(2):38-41
· Study on influencing rule of critical blank holder force of rectangula…	ZANG Shun-lai1,2,DONG Wei1,QI Wen-yi1,GUO Cheng1 (1.School of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049,China;2.State Key Laboratory of Plastic Forming Simulation and Die and Mould Technology,Huanzhong University of Science and Technol	2008 ,33(2):42-46
· Experiment validation of blank holder force model based on energy meth…	WU Jiang-yan1,WEN Tong1,YANG Tao2 (1.Mechanical Engineering College,Chongqing University,Chongqing 400043,China;2.Subsidiary of Simon in Chongqing,Chongqing 400040,China)	2008 ,33(2):47-49
· Influence of plane drawing process parameters on internal wrinkle and …	LIU Jian-hua1,WANG Zhi-heng2 (1.School of Construction Machinery,Chang'an University,Xi'an 710064,China;2.School of Material Science and Engineering,Inner Mongolia University of Technology,Hohehot 010051,China)	2008 ,33(2):50-53
·		2008 ,33(2):53-53
· Optimization design on designing surface of drawing die for automobile…	WANG Chang,LI Lin,WANG Ping,HU Ya-min (School of Automobte Engineering,Chongqing Institute of Technology,Chongqing 400050,China)	2008 ,33(2):54-58
· Synchronous hydro-bulging process and die design for double-layered me…	XIA Qin-xiang1,HUO Yu-lin1,ZHANG Shuai-bin1,ZHANG Jian-bo2,LIU Jun-xin2 (1.School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China;2.Jieyang Xingcai Steel Products Co.,Ltd.,Jieyang 522071,China)	2008 ,33(2):59-62
· Study on high inner-pressure hydro-forming of T-branch tube	WANG Zhong-tang1,ZHANG Shi-hong2,LIANG Hai-cheng1,YUAN AnYing2,LI Shu-mei3 (1.College of Materials Science and Engineering,Shenyang Ligong University,Shenyang 110168,China;2.Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;3.C	2008 ,33(2):63-66
· Experimental research on hydroforming triangle component of H62	LV Hai-yuan,LI Hong-yang,WU Zheng,MA Hao-bo (Department of Plasticity,Shanghai Jiaotong University,Shanghai 200030,China)	2008 ,33(2):66-69
· Research on metal microstructure deformation of splines manufactured b…	CUI Feng-kui,XU Yong-fu,ZHAO Wei (Electromechanical Engineering College,Henan University of Science and Technology,Luoyang 471003,China)	2008 ,33(2):70-74