Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Establishment of twostage constitutive model for SA508Gr.4N nuclear p…   2020 ,45(4):1-13
· Influence of upsetting process parameters on surface damage for torsio…   2020 ,45(4):14-20
· Repetitive forging process for pure copper   2020 ,45(4):21-27
· Thermal deformation behavior and forging process of stainless steel fo…   2020 ,45(4):28-32
· A multi-directional precision forming process of planetary frame for t…   2020 ,45(4):33-39
· Precision forming process of cross shaft with small flash   2020 ,45(4):39-44
· Stamping process of automobile engine outer panel for aluminum alloy   2020 ,45(4):45-50
· Simulation analysis of hydro-drawing for magnetic pump isolation sleev…   2020 ,45(4):51-56
· Size accuracy control of large-scale parts on fine blanking   2020 ,45(4):57-61
· Optimization of stamping process for QP980 steel rear side member   2020 ,45(4):62-69
· Test and numerical simulation of U-shape bending part for DP980 high s…   2020 ,45(4):70-75
· Optimization on forming process of 5A06 aluminum alloy end-plate   2020 ,45(4):76-86
· Mechanism of punching slug adhesion and parameter optimization in auto…   2020 ,45(4):87-92
· Numerical simulation and process optimization of composite flow formin…   2020 ,45(4):93-99
· Research on plastic locking process of interlock-type soft waveguide b…   2020 ,45(4):100-107
· Optimization on two-pass power spinning process parameters for cylindr…   2020 ,45(4):108-113
· Simulation test and optimization of punching for flange nut in automob…   2020 ,45(4):114-119
· Hydroforming technology in integral forming of spherical parts   2020 ,45(4):120-125
· Multi-wheel planetary spinning of thin-wall cup-shaped parts with inte…   2020 ,45(4):126-133
· Manufacturing of tail lamp module of master model fixture for automobi…   2020 ,45(4):134-139
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com