Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Research on local upsetting finish forging process of valve blank ZHANG Zheng-rong1,HUANG Dan-na1,MO Dong-qiang2,SUN You-song1(1.Faculty of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China;2.Huaiji Dengyun Auto-Parts(Holding)Co.,Ltd.,Huaiji 526400,China) 2009 ,34(5):1-4
·   2009 ,34(5):4-4
· Research and development of fully automated production line of valve f… XIONG Xiao-hong1,FENG Yi1,HUANG Shu-huai1,LI Qian-fang2(1.State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China;2.Mahle Tri-Ring Valve Train(Hubei) Co.,Ltd.,Macheng 438300 2009 ,34(5):5-8
· Upset forging technology of hollow shaft CHEN Xue-hui(Dongfeng Forging Limited Company,Shiyan 442012,China) 2009 ,34(5):9-11
· Process optimization of clutch block cold extrusion based on DEFORM-3D SUN Jian,ZHANG Shui-zhong(College of Materials Engineering,Shanghai University of Engineering Science,Shanghai 201620,China) 2009 ,34(5):12-15
· Research on cold forging of spur gears with high boss based on uniform… XU Feng1,XUE Ke-min1,LI Ping1,WANG Qing-rui1,CHENG Jian-gang2,SUN Yuan-fang2(1.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China;2.Liuan Jianghuai Automotive Gear Manufacture Co.,Ltd.,Liuan 237010,China) 2009 ,34(5):16-19
· Material economy and design optimization of roll forging blanking die … WU Yu-chang1,SHI Si-mei1,JU Jie1,YU Jian1,ZHOU Ping-bo1,HU Hong-wei1,FAN Zhi-hong2(1.Technology Department,Nanchang Gear Forging Factory,Nanchang 330044,China;2.Production Development Center,Getrag(Jiangxi) Transmission Co.,Ltd.,Nanchang 330044,China) 2009 ,34(5):19-22
· Research on pressure distribution for full-hydraulic underground coile… LIU Cai1,FENG Xian-zhang2,CUI Yan-mei2,WANG Ying-jie3(1.Rolling Mill Institute,Yanshan University,Qinhuangdao 066004,China;2.School of Mechatronics Engineering,Zhengzhou Institute of Aeronautical Industry Management,Zhengzhou 450015,China;3.Hot Rolling Mi 2009 ,34(5):23-25
· Design of multi-position progressive die for connector terminal ZHANG Hua(Fujian Polytechnic of Information Technology,Fuzhou 350003,China) 2009 ,34(5):26-29
· Study of key problems in multi-stage deep drawing numerical simulation… XU Lan-gui1,WANG Zi-yong2,RUAN Feng1(1.South China University of Technology,Guangzhou 510640,China;2.Jiangmen Fuhua Industrial Co.,Ltd.,Jiangmen 529000,China) 2009 ,34(5):30-32
· Experimental research on tensile test of B170P1 multi-gauge high stren… CHEN Jie1,CHEN Wei2,XUE Lei2,CHENG Shan2,TENG Guang-yu2,WU Ming-yan2(1.School of Mechanical and Electrical Engineering,Suzhou Vocational University,Suzhou 215104,China;2.School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China) 2009 ,34(5):33-36
· Design of PLC control system in automatic fins-puncher WANG Wan-xin(Mechanical and Electronic Engineering Department,Dezhou University,Dezhou 253023,China) 2009 ,34(5):37-39
· Design of vehicle lamp holder craft supplement surface based on numeri… ZHANG Yu-ping,WEI Guang-zhen(Mechanic Engineering College,Chongqing Industry Polytechnic College,Chongqing 400050,China) 2009 ,34(5):40-42
· Investigation of warm stamping-forging process for car flywheel panel WANG Xin-yun,LUO Wen-tao,XIA Ju-chen,HU Guo-an(State Key Lab of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China) 2009 ,34(5):43-46
· Research on flexible rotary forging using multi-point adjusting method LIU Chun-guo,LI Ming-zhe,WEI Shi(Roll-forging Research Institute,Jilin University,Changchun 130022,China) 2009 ,34(5):47-51
· Study on plastic deformation behavior of equal channel angular pressin… TAN Xian-feng,ZHOU Qing,LIU Xia(School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China) 2009 ,34(5):52-54
· Key technical problems of roller design and manufacture QIN Sheng-xue1,2,REN Li-xin1,HAO Ji-dong1,WU Feng-ling2,XING Zhao-bin2(1.College of Mechanical and Electronical Engineering,Shandong University of Science and Technology,Qingdao 266510,China;2.Die and Mould Subsidiary Company of Shandong XiaoYa,Jinan 2501 2009 ,34(5):55-57
· Numerical simulation research on stamping-necking process of barrel-ty… WU Zhen-ting1,WANG yan-min2(1.Scientific and Research Department,Luohe Vocational and Technology College,Luohe 462002,China;2.Computer Engineering Department,Luohe Vocational and Technology College,Luohe 462002,China) 2009 ,34(5):58-61
·   2009 ,34(5):61-61
· Experimental research on hydroforming of car chassis front frame HAN Cong1,SUN Li-ning2,YUAN Shi-jian1,LIU Gang1(1.School of Materials of Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;2.School of Mechanical Engineering,Harbin Institute of Technology,Harbin 150001,China) 2009 ,34(5):62-66
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com