Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Resent status and development of high-speed forging hydraulic press in… GAO Jun-feng(Lanzhou Lanshi Heavy Machinery Technology Co.,Ltd.,Lanzhou 730050,China) 2008 ,33(6):1-5
· Spinning technology of magnesium alloy in Japan WANG Peng-cheng1,KAWAI Kenichi2,YUE Zhi-yong3(1.College of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051,China;2.Department of Mechanical Engineering and Materials Processing,Yokohama National University,Yokohama 2008 ,33(6):6-12
· Investigation of micro parts bending DONG Pei-long,WANG Yun,XU Zhen-ying,ZHU Yong-shu,YUAN Guo-ding,CAI Lan(School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China) 2008 ,33(6):13-17
· Experimental research of forming process for axle shaft sleeve with fl… ZHANG Ru-hua,WANG Qin-jun,WANG Hai-hua,LU Xian-feng(School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031,China) 2008 ,33(6):18-21
· Numerical simulation and analysis of automobile clutch damping spindle… LI Jian-guo,TANG Wen-cheng(Department of Mechanical Engineer,Southeast University,Nanjing 210096,China) 2008 ,33(6):22-25
· Technology study on forging of high purity aluminum alloy of Al-2.18Cu… WANG Guo-jun1,2,XIONG Bai-qing1,LV Xin-yu2,ZHANG Yong-an1(1.State Key Laboratory for Fabrication and Processing of Nonferrous metals,General Research Institute for Nonferrous Metals,Beijing 100088,China;2.Northeast Light Alloy Co.,Ltd.,Harbin 150060,China 2008 ,33(6):26-29
· Research on new technology of segmented forming for oil pipe with thic… XU Kai-dong1,HUANG Zao-wen1,ZHANG Ju-guo2,WANG Yu-hai2,ZHANG Zhao-en2(1.State Key Laboratory of Material processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China;2.Shandong Nine-Ring Petroleum Machinery Co., 2008 ,33(6):30-33
· New process of isothermal precision forging of magnesium alloy engine … HUANG Yan-ping(Mechanical Electronic Engineering Department,Changchun Engineering College,Changchun 130021,China) 2008 ,33(6):33-35
· Experimental study on AZ31B deformation magnesium alloy by horizontal … ZHANG Jian1,ZHAO Bao-quan1,TAN Jin-feng2(1.Equipment Engineering College,Shengyang Ligong University,Shenyang 110168,China;2.Luoyang Copper Co.,Ltd.,Aluminum Corporation of China Limited,Luoyang 471039,China) 2008 ,33(6):36-40
· Stamping process design of oil filler WANG Yue-zhen1,2,ZHAO Zhen-duo1,LIU Jian-xin2,LI Bin2,LI Feng2(1.School of Materials Science and Engineering,Shandong University,Jinan 250061,China;2.Complete Set Plant,Weichai Power Co.,Ltd.,Weifang 261001,China) 2008 ,33(6):41-44
· Numerical simulation of magnesium alloy tailor-welded blank drawing WANG Zhong-tang,QIAN Fang(School of Material Science and Engineering,Shenyang Ligong University,Shenyang 110168,China) 2008 ,33(6):44-47
· Research on anti-cracking based on fuel tank bracket forming XU Jin-li,LI Shao-fu,TAN Rui-ming,HAN Shao-jun(School of Mechanical and Electronic Engineering,Wuhan University of Technology,Wuhan 430070,China) 2008 ,33(6):48-50
· Study of material and process parameter effect on stamping formability… YANG Bing1,CHEN Xin-ping1,WEI Xiao-ping2,LI Zhi-yong2,ZHONG Jian-lian2(1.R & D Center,Baoshan Iron and Steel Co.,Ltd.,Shanghai 201900,China;2.Guangzhou Honda Autotive Co.,Ltd.,Guangzhou 510700,China) 2008 ,33(6):51-53
· Die design and forming analysis on side-member of light truck ZHU Xing-hua,CAI Bing-fang(School of Automobile and Traffic Engineering,Jiangsu University,Zhenjiang 212013,China) 2008 ,33(6):54-56
· Experimental research and numerical simulation on cup-shaped thin-wall… XIA Qin-xiang,LI Xiao-man,LI Xiao-long,ZHOU Chi,ZHANG Shi-jun(School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China) 2008 ,33(6):57-62
· Study of 2A50 aluminum alloys in single-path equal channel angular ext… TAN Xian-feng,CHEN Wei,XIONG Hong-miao,LI Jin-hua(School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330063,China) 2008 ,33(6):63-65
· Study on semi-solid billet prepared by SIMA method HAN Fei,YU Xiao,WANG Wei-wei (School of Materials Science and Engineering,Harbin Institute of Technology at Weihai,Weihai 264209,China) 2008 ,33(6):66-68
· Optimized selection of rough temperature for vehicle hub axles XIONG Yun-chang1,REN Li-min,WEN Zhi-gao2(1.Department of Electromechanical Engineering,Nanyang Institute of technology,Nanyang 473004,China;2.YingWei Dong Feng AutoMachine Co.Ltd.of Henan,Nanshao 474674,China) 2008 ,33(6):69-73
· Numerical simulation of electromagnetic ring expansion LI Feng,HUANG Shang-yu,LIU Peng(School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China) 2008 ,33(6):74-78
· Influence of internal pressure loading path on quality of automobile f… DU Hua,XUE Ke-min,ZHOU Lin,YU Jia,HUANG Yong(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China) 2008 ,33(6):78-81
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com