Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Design on stamping die for digital sectional switch shell based on De…   2021 ,46(6):174-182
· Design of progressive die for nut side plate   2021 ,46(6):183-187
· The first adjustment and collinear linkage for stamping highspeed aut…   2021 ,46(6):188-202
· Quenching deformation laws of large thin-walled special-shaped spinn…   2021 ,46(6):203-211
· Hot working behavior of dual-state microstructure for Ti-6Al-3Nb-2Zr-1…   2021 ,46(6):212-219
· Roll surface damage detection system based on image recognition   2021 ,46(6):225-230
· Intelligent monitoring and management system of stamping die process …   2021 ,46(6):231-236
· Process scheme design on warm precision forging for spacer bush   2021 ,46(5):1-6
· CAE analysis and process optimization on hot forging for four-way valv…   2021 ,46(5):7-11
· Influence of forging process on manganese sulfide and mechanical prop…   2021 ,46(5):12-18
· Analysis on incremental forming mechanism for figure-eight part   2021 ,46(5):19-24
· Lightweight design method on rear suspension spring connecting rod bas…   2021 ,46(5):25-33
· Simulation and experiment on springback for cold stamping of marine …   2021 ,46(5):34-38
· Multi-objective optimization on head forming process parameters based …   2021 ,46(5):39-45
· Multi-objective optimization on hot stamping process for vehicle B-pil…   2021 ,46(5):46-52
· Design of hydraulic drawing blank holder   2021 ,46(5):53-56
· Optimization on self-piercing riveted performance of aluminum alloy pl…   2021 ,46(5):57-63
· Springback compensation research of stamping for automobile hood outer…   2021 ,46(5):64-71
· Experimental and simulation study on quality of thinwall copper tube …   2021 ,46(5):72-78
· Influence of rivet height on tensile strength of self-piercing riveted…   2021 ,46(5):77-83
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com