Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Design of trimming and piercing compound die for radiator cover of aut… LI Shu-yu，TIAN Fu-xiang 2011 ,36(1):100-102
· New hot forging die steel application in valve precision forging die JIN Kang, CHEN Dong, CHU Zuo-ming,DENG Jian-xiong 2011 ,36(1):103-108
· Punch application in truck bumper drawing die ZHOU Yu-ming 2011 ,36(1):108-110
· Study on protective lubricant technology for isothermal super plastic … FENG Zhao-hui,HU Xing-hua, GUO Hong-zhen,YAO Ze-kun, LU Zheng, GONG Peng 2011 ,36(1):111-114
· Optimization of heating process for long-shaft heavy forging ZHAO Xue-zhi, XIANG Ke1, XIA Qin-xiang, LI Ming, ZONG Wei-qi 2011 ,36(1):115-118
· Constitutive equation of hot deformation for casting ZnAl10Cu2 alloy WU Xiao-ping, LI De-fu, GUO Sheng-li, XU Xiao-qing, HE Jin-yu, Hu Jie 2011 ,36(1):119-123
· Influences of conditions at tube-blank end on viscous medium outer pre… GAO Tie-jun, LIU Zhan-jun, WANG Zhong-ji 2011 ,36(1):124-127
· Effect of surface oxide on thermo-physical parameters for 26Cr2Ni4MoV … KONG Ling-chao，JIN Quan-lin 2011 ,36(1):128-132
· Deformation and stability analysis of single crystal for single slip LI Yue-yu, LIU Shu-chun 2011 ,36(1):133-135
· Influence of different electric current pulses on twin roll casting mi… YANG Qun-ying，YAN Feng-yun，REN Lin-chang，GENG Hai-tao 2011 ,36(1):136-139
· Test and prediction study of U-section channel in press bending spring… WANG Da-yong，FU Li-bin,LI Wei，LU Xing，HUANG Yong-hong 2011 ,36(1):140-143
· Effects of isothermal forging on microstructures and mechanical proper… YU Jun-cai 2011 ,36(1):144-146
· FEM simulation of cold bending formation laws of stainless steel corru… ZHANG Yi，ZOU Zhong-ping，LIU Hua-min 2011 ,36(1):147-152
· Optimization research on rough rolling process of H-beam based on ANN… LIU Lan-lan, ZHANG Qin-he, LI Chuan-yu, MA Ru-po 2011 ,36(1):153-156
· Optimum design of multi-step forming part based on response surface mo… LIU Wei，WU Jian-jun，PENG Yong-qian 2011 ,36(1):157-160
· Heat-engine coupling condition analysis of spinning roller with hollow… FAN Su-qin，GAO Shun-xi，WU Li-bo 2011 ,36(1):161-163
· Brief introduction of stamping material utilization ratio ZHAO Jian-hui 2011 ,36(1):164-167
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com