Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Material characteristics and quality state of FB2 rotor steel used in …   2022 ,47(7):42-52
· Design and simulation optimization on intelligent forging production w…   2022 ,47(7):53-58
· Integration process on forming and curing of fiber-reinforced metal la…   2022 ,47(7):59-67
· Analysis on multi-station forming process and stamping die design for …   2022 ,47(7):68-79
· Experiment study on springback of TC4 titanium alloy sheet part with l…   2022 ,47(7):80-85
· Response surface optimization analysis on gray hopper deep drawing ba…   2022 ,47(7):86-94
· Research on forming force of multi-gripper stretch forming for trapezo…   2022 ,47(7):95-99
· Parameter optimization on stamping of neutral network-strong reproduct…   2022 ,47(7):100-106
· Influence of process parameters on forming quality for automobile alu…   2022 ,47(7):107-111
· Trimming and restriking composite process for panorama sunroof panel …   2022 ,47(7):112-121
· Influence of forming rate on stretch forming for 5 m melon petal   2022 ,47(7):122-126
· Reason analysis on orange peel defect of DX53D+Z galvanized sheet   2022 ,47(7):127-131
· Experiment and process parameter optimization on high pressure water …   2022 ,47(7):132-137
· Reason analysis on inner folding and process improvement of multi-sta…   2022 ,47(7):138-144
· Influence of lower plate thickness on single lap shear strength of joi…   2022 ,47(7):145-153
· Cold extrusion process and die design of double cup shell parts   2022 ,47(7):154-161
· Formation and evolution of interface voids in laminated metal   2022 ,47(7):162-166
· Prediction on rolling force in hot rolling of wide and thick plate bas…   2022 ,47(7):167-174
· Finite element analysis on deformation behavior of Cu/Al/Cu clad sheet…   2022 ,47(7):175-183
· Optimization design on dimension of six-link mechanism based on geneti…   2022 ,47(7):184-193
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com