Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Numerical simulation of self-piercing riveting with semi-tubular rivet HUANG Zhi-chao,ZHAN Jin-qing,CHEN Wei(School of Mechanical and Electronic Engineering,East China Jiaotong University,Nanchang 330013,China) 2007 ,32(5):54-58
· Experimental study on thinning of thin-walled tube NC bending process … YUE Yong-bao,YANG He,ZHAN Mei,KOU Yong-le,LI Heng(Department of Materials Forming and Control,Northwestern Polytechnical University,Xi'an 710072,China) 2007 ,32(5):58-62
· Experimental analysis of rolling force influence factor of anchor rod … FAN Xu-ping,LIU Jin-ping,YAN Hua-jun,HU Zheng-huan(School of Mechanical Engineering,University of Science and Technology Beijing, Bejing 100083,China) 2007 ,32(5):63-66
· Technological research on extruding steering spiral bar LIU Jie,WANG De-jun,YANG Xiao-hong(School of Mechanical and Electrical Engineering,Hebi Vocational Technical College,Hebi 458030,China) 2007 ,32(5):66-68
· Application study on swaging special-shaped non-ferrous metal wire of … FANG Shu-ming,LEI Ting,ZHANG Yu-ling,LI Hao,ZHOU Lin,ZHANG Jia-min(Technical Center of Yunnan Metalluegical Group Ltd.,Kunming 650031,China) 2007 ,32(5):69-72
·   2007 ,32(5):72-72
· Research on peen forming process of integral wing skin panel with bend… CHENG Xiu-quan1,ZHANG Jian-rong1,XIA Qin-xiang2(1.Department of Aviation Maintenance Engineering,Guangzhou Civil Aviation College,Guangzhou 510403,China;2.School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China) 2007 ,32(5):73-76
· Optimization of extrusion part based on moving least squares response … ZHOU Feng-jia,TANG Yu-cheng,ZHOU Xiong-hui(National Die & Mold CAD Engineering Research Center,Shanghai Jiaotong University,Shanghai 200030,China) 2007 ,32(5):77-81
· End upsetting process for oil drill pipe and numerical simulation HUANG Zao-wen1,HUANG Wei-jun1,PAN Hong-guo2(1.State Key Laboratory of Plastic Forming Simulation and Die & mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China;2.Machinery Plant of Yumen Petrol Administration Bureau,Yumen 7352 2007 ,32(5):82-85
· Die design method for sheet metal stamping workpiece with compensating… LI Wen-ping1,Bian Wen-de2,NIE Shao-min1,GUO Bao-feng1,JIN Miao1(1.College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China;2.Dongfang Electrical Machinery Co.,Ltd.,Deyang 618000,China) 2007 ,32(5):86-91
· Structure improvement of cold extruding die ZHENG Hui1,2,YU Jiang3,LIAO Li-ping3(1.School of Aerospace Engineering,Shenyang Institute of Aeronautical Engineering,Shenyang 110034,China;2.State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110004,China;3.Shenyang Airplane 2007 ,32(5):92-93
· On line cutting die design of cold-bending section steel with complex … QIAO Zi-ping,HAN Jing-tao,LIU Jing(School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China) 2007 ,32(5):94-98
· Hot extrusion technology and die design of aluminum alloy pull-rod LIU Rui-hua,SONG Ke-xing,GAO Jian-xin,JIA Shu-guo,GUO Xiu-hua,WANG Qing(School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China) 2007 ,32(5):98-100
· Pressing technology of bracket and die design YANG Tai-de(Electromechanical Engineering School,Lianyungang Technical College,Lianyungang 222006,China) 2007 ,32(5):101-102
· Application of UG/OPEN on designing trimming curves of automobile body… WANG Chang,XU Nan-shao,XU Hui-juan,HU Ya-min(School of Automobile Engineering,Chongqing Institute of Technology,Chongqing 400050,China) 2007 ,32(5):103-107
· Upset forging die design of cylindrical ribwork sucker rods WU Feng-zhi,HUANG Wei-jun,XU Kai-dong,HUANG Zao-wen(State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China) 2007 ,32(5):107-109
· CNC electrical screw presses XIONG Xiao-hong,LI Jun-chao,FENG Yi,HUANG Shu-huai(State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,Huazhong University ofScience and Technology,Wuhan 430074,China) 2007 ,32(5):110-114
· Crankshaft flexibility analysis of the crank press based on ANSYS ZHOU Zhi-hong,LI Xiao,SUN Chang-sheng(School of Civil and Environment Engineering,University of Science and Technology Beijing,Beijing 100083,China) 2007 ,32(5):114-117
· Study on designing forging & stamping data-sharing system JIN Hong,ZHANG Qian-sheng(Beijing Research Institute of Mechanical and Electrical Technology,Beijing 100083,China) 2007 ,32(5):118-121
· Finite element simulation to gear precision forming of car differentia… WANG Hai-ping1,ZHANG Yao-zong1,LI Lin-gang2,LIN Xue1(1.School of Materials Scienle and Engineering,Henan University of Science and Technology,Luoyang 475001,China;2.Ningbo Baowang battery Co.,Ltd.,Ningbo 315600,China) 2007 ,32(5):121-124
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com