Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· Research on heavy reduction rate rolling of AZ31 Magnesium alloy CHEN Bin,LIN Dong-liang,ZENG Xiao-qin,LU Chen(School of Materials Science and Engineering,Shanghai Jiaotong University,Shanghai 200030,China) Abstsact:The heavy reduction rate rolling of AZ31 Magnesium alloy is investigated in this paper.The ways to reali 2006 ,31(3):1-3
·   2006 ,31(3):3-3
· Way for improving the quality of connecting rod die forging of large-m… WAN Xu-yi(CSR Ziyang Locomotive Works,Ziyang Sichuan 641301,China) 2006 ,31(3):4-8
· Contour forging process for Titanium alloy swashplate WAN Deng-pan(Guizhou Jinjiang Aviation Hydraulic Co.,LTD.,Guiyang Guizhou 550018,China) 2006 ,31(3):9-10
· Forging technique research of MB2 Magnesium alloy ZHANG Hong-feng,TIAN Guang-hui(Mechatronics Department,Nanyang Institute of Technology,Nanyang He'nan 473004,China) 2006 ,31(3):11-12
· Effect of forging defect of 20CrNiMo cone and jaw to mechanical proper… DING Yan-hong,HUANG Han-yun(School of Mechanical Engineering,Hu'nan University of Technology,Zhuzhou Hu'nan 412008,China) 2006 ,31(3):13-15
· Discussion on about the forging process of high temperature heat-resis… JIA Cong-tian,LIU Geng-wu (Department of Mechanical and Electrical,Hu'nan Railway Professinal Technology College,Zhuzhou,Hunan 412001,China) 2006 ,31(3):16-18
· Investigation on forming limit of tailor-welded blanks HAO Chang-ling,ZHOU Xian-bin(School of Mechanical Engineering and Automation,Beihang University,Beijing 100083,China) 2006 ,31(3):19-22
· Test research of stamping property for super steel plate NI Hong-qi~(1,2),LIU Xiang-hua~(1),WANG Guo-dong~(1)(1.State Key Lab of Rolling an Automation,Northeastern University,Shenyang Liaoning 110004,China;2.College of Mechanical Engineering,Shenyang Institute of Chemical Technology, Shenyang Liaoning 110142,Ch 2006 ,31(3):23-25
· Integrated system for optimizing the nesting of 2-D parts in 2-D sheet… SI You-quan~(1*),CHENG Dong-hong~2(1.Center of Electrotechnics and Electronics Experiment Teaching,Hubei Normal University,Hubei Huangshi 435002,China2.Huang gang School of Water Resources and Electrical Engineering,Huanggang Hubei 438000,China) 2006 ,31(3):26-28
· Application of KBE technology on drawing part design for autobody pane… WANG Yi-lin,ZHENG Jin-qiao,LI Zhi-gang(State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan Hubei 430074,China) 2006 ,31(3):28-31
· Fracture analysis of the stamping technology of a certain automobile h… PENG Bi-you~(1,2),YIN Guo-fu~(1),XIAO Yun-gen~(2) LI Hai-qing~(1),FANG Hui~(1)(1.School of Manufacturing Science and Engineering,Sichuan University,Chengdu Sichuan 610065,China;2.School of Materials Science and Engineering,Xihua University,Chengdu Sichuan 2006 ,31(3):32-35
· Research on numerical simulation for surface quality of transformer ra… XU Ping,XU Bin (Mechanical Engineering College,Liaoning Technical University,Fuxin Liaoning 123000,China) 2006 ,31(3):35-37
· Research and application of forming process for over thick stainless s… XIE Xiao~(1),JIN Chuan-hui~(2)(1.Baoji Line Part Works of China Railways Electrification Engineering Bureau Group,Baoji Shanxi 721004,China;2.Gaoyou New Strength Stainless Steel Co.,Ltd.,Gaoyou Jiangsu 225606,China) 2006 ,31(3):38-38
· Numerical simulation of the influence on rectangular case drawing defo… WEI Le-yu,E Da-xin(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China) 2006 ,31(3):39-42
· Friction disks' fine-blanking deforming experiment study TANG Jian-yun ~(1),HUANG Shang-yu,HU Jian-hua,SHI Jian,ZHOU Kai-hua~(2)(1.School of Materials Science and Engineering,Wuhan University of Technology,Wuhan Hubei 430070,China;2.Wuhan Huaxia Fine-blanking Technology Co.,Ltd,Wuhan Hubei 430070,China) 2006 ,31(3):43-45
· Flow stress behavior of AZ31 Magnesium alloy sheet during warm tensile XIAN Kui-feng,ZHANG Hui,CHEN Zhen-hua(College of Materials Science and Engineering,Hu'nan University,Changsha Hu′nan 410082,China) 2006 ,31(3):46-49
· 3D FEM simulation of cross tube drawing process HU Long-fei,LIU Quan-kun,WANG Qiang,XU Yi(School of Material Science and Engineering,Hefei University of Technology,Hefei Anhui 230009,China) 2006 ,31(3):50-54
· Research on isothermal precision technology of rib-web forging parts YANG Ping~(1,2),SHAN De-bin~(1),GAO Shuang-sheng~(1),XU Wen-chen~(1),LV Yan~(1)(1.School of Materials Science and Engineering,Harbin Institute of Technology, Harbin Heilongjiang 150001,China;2.Qiqihaer 2th Lathe Corporation Group,Qiqihaer Heilongjiang 161 2006 ,31(3):55-58
· Technique of surface reconstruction about the instrument panel of auto… WANG Lei,XING Yuan,LE Bin-wang(Department of Plasticity Technology,Shanghai Jiaotong University,Shanghai 200030,China) 2006 ,31(3):59-63
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com