Home
Editorial Committee
Brief Instruction
Back Issues
Instruction to Authors
Submission on line
Contact Us
Chinese

  The journal resolutely  resists all academic misconduct, once found, the paper will be withdrawn immediately.
Location：Home >> Search
Search：
TitleAuthors_enyear,vol(issue):pagenumber
· High inner pressure hydroforming simulation and experiment on Al 5083 …   2012 ,37(1):81-86
· Numerical analysis of cross-section distortion of multi-point press be…   2012 ,37(1):87-90
· Research on working cylinder unloading curve based on principle of ene…   2012 ,37(1):91-94
· Design and optimization of synchronization balance cylinder for 800MN …   2012 ,37(1):95-99
· Design of data acquisition system for hydraulic pressure molding machi…   2012 ,37(1):100-104
· Application of PLC and touch screen in multi-station cold forming mach…   2012 ,37(1):105-109
· Regulation structure design of double point stroke adjustable press of…   2012 ,37(1):110-113
· CAE analysis of staged oblique end combined cavity die based on ANSYS   2012 ,37(1):114-116
· Simulation analysis and discussion of warm extrusion die early failure…   2012 ,37(1):117-121
· Incision process and die design of top-hanging tube for motor bicycle   2012 ,37(1):121-124
· Precisely forming process and mold design of support shaft   2012 ,37(1):125-128
· Design of mobile stator core folding mould   2012 ,37(1):129-132
· Bending process and mold design of thin-walled copper tube   2012 ,37(1):132-135
· Production practice of stable operation sequerence for large vertical …   2012 ,37(1):136-140
· Research on image segmentation algorithms for high temperature shaft h…   2012 ,37(1):141-145
· Stress-strain analysis of bending and springback for thin-wall rectang…   2012 ,37(1):146-149
· Investigation on hot deformation behavior and deformation structure ev…   2012 ,37(1):149-153
· Effects of different technological parameters on vertical extrusion pr…   2012 ,37(1):154-158
· Numerical simulation of the forging process for cylinder end   2012 ,37(1):158-161
· Forming analysis of curved surface shell based on numerical simulation   2012 ,37(1):162-164
Copyright Forging & Stamping Technology.All rights reserved
 Sponsored by: Beijing Research Institute of Mechanical and Electrical Technology; Society for Technology of Plasticity, CMES
Tel: +86-010-62920652 +86-010-82415085     Fax:+86-010-62920652
Address: No.18 Xueqing Road, Beijing 100083, P. R. China
 E-mail: fst@263.net    dyjsgg@163.com